Use and Care Guide

MOUNT

DRAIN VALVE

HERE

1. If there is an existing drain connection for a 1/4-inch quick connect tube, then use this connection.

Otherwise, locate a suitable area on the sink drain pipe to install the provided drain clamp.

NOTE: Select a location for

the drain hole based on the

design of the plumbing. It

should be installed above the

trap and on the vertical or

horizontal tail piece. Locate

the drain connection away

from the garbage disposal.

See example to the right.

2. Once a suitable spot has been selected for the drain clamp,

drill a 1/4-inch hole into one side of the pipe. Be sure to

use a suitable drill bit for the material being drilled into (for

example: PVC versus Metal Pipe) and be sure to use safety

goggles.

NOTE: Starting with the 1/8-inch drill bit, drill a 1/8-inch hole

in the drain pipe. Use the 1/4-inch drill bit to enlarge the hole.

If you do not have a 1/8-inch drill bit, then you can just use

the 1/4-inch bit. Clean the debris from the pipe and the hole

before continuing.

STEP 3: DRAIN CLAMP INSTALLATION

WARNING: this step may require drilling into the existing drain pipe. Please seek

professional help when completing this step and always wear safety protection including

safety goggles!

DO NOT drill all the way through the pipe.