Use and Care Guide

16
FILTER REPLACEMENT
HOW TO REPLACE THE FILTERS
4. Turn the lter(s) to be replaced a quarter-turn counter-
clockwise until the unlock arrow on the lter label lines up
with the arrow on lter base above it. Pull down to remove.
3. Remove the front cover from the Circle as shown.
Match this to the arrow on the lter base
2. Once the tank has drained, close the T-valve under the sink to
shut o the ow of water to the Circle.
Turn the faucet o.
1. Turn the Indicator faucet on all the way and keep it on until
the water tank is emptied completely. Keep the faucet on, in
order to release any leftover pressure in the system.
NOTE: Since this water is ltered water, you may want to
store it in a pitcher.
1
2
3
4
SEE DIAGRAM ON
FILTER HOUSING ABOVE