Use and Care Guide

19
PREPARING FOR EXTENDED NONUSE
If the system has not been used for two weeks or more, turn the RO water faucet on and allow the
system to drain completely (about 10 minutes). Turn the RO water faucet o and allow the system to
regenerate the water supply (about 40 minutes).
If the system will not be used for a very long time (over 45 days), then completely drain the water
tank using an air-pump by inserting the pressurized air-pump into water inlet hole on the top and
opening the faucet until the system completely drains (about 10 minutes).
When you are ready to use the system again, ush the system twice following the steps on page 18,
step 9.