Instructions / Assembly

Toilet Fit Guide
You’ll need to measure your toilet to determine:
- Whether a Brondell Swash will fit (the Swash fits most residential toilets)
- Whether you need an Elongated or Round Swash
Do you have an unusual toilet or questions about your measurements?
Please contact Brondell Customer Service at 888-542-3355, or send us an email at [e-mail]
for additional help.
Is the distance from the center of the bolt holes to
the toilet tank less than 2"?
The Swash may extend slightly over the
front edge of your toilet bowl.
Measure the distance from
the front of the toilet tank to
the front of the toilet bowl.
If this measurement is less than 20½", consider purchasing
a Round size to reduce the amount the seat extends over
the front edge, even if your fixture is elongated.
The overall length of the Round Swash is 19.4".
A distance less than 19.4" from the tank to the front of the
toilet bowl will also cause overhang.
≤ 20½"
Measure the distance from the bolt holes
to the front of the toilet bowl to determine
if you have a round or elongated fixture.
Measure the distance between the bolt
holes to ensure the space is between
5¼ inches and 8 inches.
Measure the distance from the center of the
bolt holes to the toilet tank to determine
proper clearance. The toilet will need at least
1½ inches of clearance.
5¼" – 8"
18" – 19½"
ELONGATED
If your measurement is 18" – 19½"
Order an Elongated Swash
If your measurement is 16" – 17¾"
Order a Round Swash
16" – 17¾"
ROUND
≥ 1½"
≥ 1½"
from center
French
Curved
Tank