Full Product Manual

MAINTENANCE

Use a soft, damp cloth and mild cleanser (such as dish soap, Simple Green or Windex) to wipe

down the seat. DO NOT scrub or use harsh, abrasive products to clean the Swash. DO NOT use

thinner, benzene, acidic chemicals, chloride, or hydrochloric acid detergent. This may result in

corrosion to the metal parts or discoloration or scratches to the bidet body.

For a more thorough cleaning, you may remove the Swash. To remove the bidet, forcefully pull

the bidet away from the toilet tank o of the mounting plate.

Unplug the Swash from the power source before cleaning or removing the seat.

1. Press and release the Eco Mode and Rear Wash buttons

on the auxiliary control panel simultaneously. The nozzle

will extend into the toilet bowl.

2. Gently clean the nozzle manually with a soft cloth or

toothbrush.

3. To retract the nozzle press the “Stop” button on the

Remote Control.

Step 1

SEAT CLEANING & REMOVAL

NOZZLE CLEANING

NOTE:

• Be cautious of leaving home and beauty products in contact with the bidet seat, the result

of which can be irreversible discoloration. Most stains can be removed using a 1:1 mix of

rubbing alcohol and water and a soft cloth or towel. However, some permanent stains are

the result of substances left on the seat while the seat heater was activated. Be cautious

of home and beauty products (including but not limited to various hair and air freshener

sprays, lotions, body wash, skin tanners, body butters, and oils) that come in contact with

the seat. Wash o any substances that come in contact with the seat as soon as possible. If

necessary, replacement seat parts can be purchased through Brondell customer support.

NOTE:

• The Nozzle Cleaning function will not work if the seat

is occupied.