Dimensions Guide

Toilet Fit Guide
You’ll need to measure your toilet to determine:
- Whether a Brondell Swash will fit (the Swash fits most residential toilets)
- Whether you need an Elongated or Round Swash
≥ 1½"
Is the distance from the center of the bolt holes
to the toilet tank less than 2"?
The Swash may extend slightly over
the front edge of your toilet bowl.
Measure the distance
from the front of the
toilet tank to the front
of the toilet bowl.
If this measurement is less than 20½", consider
purchasing a Round shape to reduce the amount the
seat extends over the front edge, even if your fixture
is elongated.
The overall length of the Round Swash is 19.55".
A distance less than 19.55" from the tank to the front
of the toilet bowl will also cause overhang.
≤ 20½"
Measure the distance from the bolt holes
to the front of the toilet bowl to determine
if you have a round or elongated fixture.
Measure the distance between the bolt
holes. The space must be between
5¼ inches and 8 inches.
Measure the distance from the center of
the bolt holes to the toilet tank to ensure
proper clearance. There must be at least
1½ inches of clearance.
5¼" – 8"
ELONGATED
18" – 19½"
If your measurement is 18" – 19½"
Order an Elongated Swash
If your measurement is 16" – 17¾"
Order a Round Swash
16" – 17¾"
ROUND
≥ 1½" from center
French
Curved
Tank