Operating Guide

4
SAFETY INFORMATION (cont.)
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
Failure to observe the following warnings may result in electric shock, fire, personal injury, property
damage, or product damage.
Do not connect the main water supply to the hot water pipe or supply (only connect to the cold
water supply).
After the installation, make sure to check all water supply connections for leaks. Rubber washers
should be in place for the water connection hoses & T-Valve.
Do not open/close the seat or seat cover with excessive force.
Exercise caution that urine does not come into contact with the product - failure to do so may result
in bad odors or malfunction.
If the product will not be used for a long period of time, unplug the power cord, close the main
water supply valve, and drain any water in the water tank.
Do not pull out the bidet hose using excessive force.
Do not use thinner, benzene, acidic chemicals, chloride, or hydrochloric acid detergent on or near
the product. This may result in corrosion to the metal parts or discoloration or scratches to the bidet
body.
This appliance is not intended for use by persons (including children and seniors) with reduced
physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning the use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not play with the appliance.
CAUTION
WARNING
Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Contact the Brondell Service Center for examina-
tion and repair.
Keep the cord away from heated surfaces and heating vents.
Never block the air openings of the product or place it on a soft surface, such as a bed or couch,
where the air openings may be blocked. Keep the air openings free of lint, hair, etc.
Never drop or insert any object into any opening or hose.
Do not use the product outdoors or operate where aerosol (spray) products are being used or a
room where it could be exposed to oxygen.
Connect this product to a properly grounded outlet only. Refer to the Grounding Instructions in the
next Pages of the manual.