Instructions / Assembly

STEP 5: CONNECTING THE TUBING

1. Water Supply Connection

Use the supplied white Water Supply Tubing to connect the T-valve to the Filter Head Connector

Assembly by pushing one end of the tubing rmly into the Quick Connector

Collette on the open side of the T-Valve. Be sure to push in all the way and ensure the Tube

is not bent or kinked.

Then connect the other open end of the Tubing to the Filter Head Connector Assembly “Inlet”

by inserting the tube into the Collette on the Quick Connect 90° Elbow on the side labeled

“Inlet”.

Using "Quick Connectors"

Tube connections on the T-Valve, Filter Head Connection Assembly, and Indicator Faucet are all of

the “Quick Connect” variety. The steps below illustrate how to connect and disconnect the Tubes

from these connectors.

a. Push the Tube into the Collette. The Collette is a collar that

provides a secure t for the Tube and prevents water leaks.

b. Push the Tube in until it stops. The Tube will be secure, and

resistant to tugs or pulls. The Collette will be rigid and raised

slightly from the connector housing.

c. To disconnect the Tube, push down and hold the Collette rst,

and then pull the Tube out gently.

2. Faucet Connection

Now, connect the open end of the Blue Tubing coming from the Faucet to the Filter Head

Connector Assembly “Outlet” by inserting the Tube into the Collette on the Quick Connect 90°

Elbow on the side labeled “Outlet”. Be sure to push in rmly all the way and ensure the Tube is

not bent or kinked.

Connector

Housing

Tube

Collette

Visit brondell.com for our Quick Connect Tutorial video.

PRODUCT INSTALLATION (cont.)