AMICO COLOR Instruction manual- English
1. INTRODUCTIONS 1.1 INFORMATIONS : Thanks for choosing AMICO COLOR digital mobile phone. With this user manual, you can understand the operation of the mobile phone and enjoy its perfect function and simple operation. AMICO COLOR mobile phone is designed for GSM/GPRS network. This AMICO COLOR mobile phone accords with GSM/GPRS technical specification and is approved by domestic and international authoritative organizations.
2. BEFORE USING 2.
5 Side DW 11 button 6 Flashlig 17 Flashlight 18 Battery ht Send key 12 button LCD screen cover Numeric keys Keys Navigation keys Right key Left key Dial key END/Power key Description UP navigation: press the Up navigation key to move up. DOWN navigation: press the Down navigation key to move down Carry out the function indicated by the directing symbol at the bottom right corner of the screen.
Number key * key # key Side key SOS key Enter numbers and characters. 1-9 number keys can be set as one-touch dial keys. Enter specific symbols, Chinese punctuation, symbol *, P and W. It usual as volume key. Press ＃ key to switch input methods. Hold this key long time to switch between mute mode and normal mode. It usual as volume key to match with star key. Press side key to move up/down, some special screen use them to move left/right. For example in phone setting date and time screen.
handset to open the battery cover, then lift up the battery to remove. Install: Insert the battery, push the battery cover until you hear “click” 2.4 Charging the battery Connect the power supply of charger. Plug the charger connector into the charge port at the top side of the phone. Charge indicator displays on the screen and flickers during the charging process. If the battery is charged in power-off condition, the screen will display charging indicator to tell the phone is charging.
Plug in the USB cable in power on mode and the menu will be popped out. Mass Storage: it can still be in power on status and be used as a U-disk, while it has the function of USB charging. Insert the USB cable in power off mode: To use it as a U-disk, while it has the function of USB charging. COM Port: it can be used as a modem or USB charging function. 2.6 Connecting to the network 2.6.1 SIM card Please insert a valid SIM card (user Identification card) into the phone before using it.
2.6.3 Switching on/off your phone Press and hold the END/Power key to switch on/off the mobile phone. 2.6.4 Unlocking the SIM card By setting PIN 1 (personal Identification number) code of SIM card and handset lock code, you can protect your SIM card and phone from illegal use. When this function is put in use, you have to enter PIN1 code each time you power on your phone. To unlock the SIM card before you dial or receive calls.
connected. 2.6.6 Making calls When the operator symbol of the network appears in the screen, you can make or answer calls. The manifestation in the top left hand corner of the screen shows the signal strength of the network. 2.6.7 Making DDD (Direct Distance Dialing) To dial: Area Code + Phone number + Send key 2.6.8 Making IDD To dial: (+)Country Code + Complete phone number + Send key 2.6.
2.6.10 Emergency call If you are within the network coverage area (It can be checked by the network signal strength displayed in the upper left corner of the screen), you are entitled to make emergency calls. If your network provider doesn’t supply roaming service in the area, the screen will display “EMERGENCY”, which means only emergency calls are available. If you are within the network covering area, emergency calls can be made even without SIM card. 2.6.
Phonebook in alphabetic order of the initial letters of the names. By use of this function, you can search for your desired number in Phonebook. 3.3 Messages If network supports and you have subscribed this service, you can freely send and receive short messages. 3.3.1 Write message The network serve of text message allows you to send out the text messages to the other phone which can receive the text message. Be sure you have established the center number of service before writing new messages 3.3.
slide before or set the slide timing. Advanced: Allowing you to insert attachment or insert bookmark. Save to Drafts: Only allowing you to save the message in Drafts. 3.3.3 Inbox Press Select to read the content of the message after the message list. 3.3.4 Drafts After entering Drafts, it displays those messages only saved in Drafts, press the Send key in the index, you can select “View, Edit, Delete, Delete all 3.3.
Delete Inbox, Outbox, Drafts, Sent messages or All messages to do the correlative operation. 3.4 Call center In Idle mode, press the Up key to enter the Main Menu, press Up/Down key to select “Call center” to enter. 3.4.1 Call history 3.4.2 Dialed calls Enter the tag Dialed Calls to view the dialed call list. 3.4.3 Received calls Enter the tag Received Calls to view the received call list. 3.4.
3.5.2 SOS You can select On or Off to start or stop SOS function. Emergency number set In the number list screen, you can press the Send key to select Edit or Remove. Additionally you can set the emergency number by sending a message to the phone. You can write a message command: “setnumber:name:number:code”,e.g.“setnumber:Jack:13 715266888: 0000” and send the message to the phone. Note: The verified code can be set in “Code Set”. The default code is 0000.
the phone. You can write a message command: “pwd:new code:old code”, e.g.“pwd:1234:0000” and send the message to the phone. 3.5.5 Calendar This function can view calendar at any time. 3.5.6 Alarm Display the schedules of today and future. In Options, you can View, Add, Edit, Delete, Delete all or Send. 3.6 Settings 3.6.1 Phone settings Time and Date: Set Time and Date. Schedule power on/off: set a auto power ON/OFF time of the handset. Language: select a display language of handset menu.
SIM card Network setup Network selection: set the method of selecting networks. Automatic: Auto search the network to which the SIM card is subject. Manual: Search all available networks, and register manually. Preferences: Pre-save some favorite networks. Band Selection: Select a proper band. GPRS connection: select GPRS connecting mode, constant or temporary. 3.6.3 Security settings 3.6.3.
Code to unlock SIM card. PIN code and PUK code may be given you along with SIM card. If you don’t have it, please contact your network service provider. In general, default PIN code is 1234, please change to your own code. 3.6.3.2 Change password Change the Password of the phone. The default password of phone is 1122 3.6.3.3 Auto keypad lock Set the waiting time for locking the key pad. After setting, key pad will be locked automatically. 3.6.
Ring type Repeat: the ring tone repeats uninterruptedly. Ascending: the ring tone repeats uninterruptedly, and gets increasingly loud. Beep once: the ring tone is heard once only. Incoming call: You can press the Send key to enter the option list to select “Change” to choose the ring tone and save it. Ringtone volume: Press the Left or Right key to adjust the volume. Message: You can press the Send key to enter the option list to select “Change” to choose the ring tone and save it.
Recover the default value. 4. EC COMPLIANCY DECLARATION The company Brondi S.p.A., with legal headquarters in Via B. Gozzoli n. 60-00142 Roma and operative base in Via Guido Rossa 3-10024 Moncalieri (TO), declaration that the device AMICO COLOR complies with all the requirements specified in the 95/5/CE European Directive Concerning radio and equipment and that it complies with the following telecommunication regulations EN301511 V9.0.2, EN301489-7 V1.3.1, EN301489-1 V1.8.
BRONDI S.p.A. www.brondi.it info@brondi.
