Operation Manual

6.11 TO PAGE THE HANDSET

This function is useful if you can’t ﬁ nd your handset.

• On the base unit press and release the button. The handset rings with a special tone.

• To stop the handset ringing, on the handset press any button or numbered key.

6.12 TO LOCK THE KEYPAD

To lock the handste’s keypad so that no buttons can be pressed.

• To block the handset keypad, while handset is idle press

and hold it for a few seconds;

until you hear a conﬁ rmation beep and appears on the display.

• To unlock the keypad, press , again and hold it until disappears from the display.

6.13 USING YOUR CORDLESS ON A PABX

PAUSE FUNCTION

If you have a PABX connection you need to pause for a few seconds between dialing the

system code and the actual phone number. To pause, press the

button and a dash “-” will

appear on the display.

6.14 REDIAL

This is the ﬂ ash key, press it during the line is engaged to send the ﬂ ash signal.

6.15 TURNING RINGER TEMPORARILY OFF

• To turn the ringer temporarily off, when the handset is idle press and hold for a few seconds

the button, the symbol will appear on the display.

• To turn the ringer back on, press and hold again the button

the symbol

will disappear

from the display.

IMPORTANT: with this function active only the base rings when receiving a call, while the handset

onluy shows a symbol on the display.

BRAVO CORDLESS-2-lingue 6-09-2005, 16:0213