Operation Manual

14
7. MEMORY AND CALLER DISPLAY
7.1 10 MEMORIES
You can store up to 10 numbers in memory. Each number can have up to 25 digits.
TO STORE A NUMBER
Make sure the handset is idle (not connected).
1. Press the
button and hold it untill the symbol fl ashes on the display.
2. Key in the number you want to store (max 25 digits). If you have a PABX connection, always
remember to press the button between the system access code and the actual
telephone number. Use the and buttons to move the cursor from a digint to
another, and the DEL button to delete a wrong digit to the left of the cursor.
3. Briefl y press the button, again, the thephone number moves to the right on the display
and the cursor fl ashes on the left.
4. Key in a memory location number (0 to 9).
5. The display goes back to standby mode.
To store another number, start again form step 1.
You can delete a record by simply storing a new number in the same location.
TO DELETE A NUMBER FROM MEMORY
1. Press the button and hold it until the symbol fl ashes on the display.
2. Briefl y press the button, again, a dash “-“ will appear on the display.
3. Key in the memory location number (0 to 9).
4. You hear a confi rmation tone and the display goes back to standy mode.
TO SELECT A MEMORY
1. When the handset is idle press briefl y the
button to enter the Phone Book.
2. Key in the memory location number, if the wrong number appears on the display, key in
another memory location number (0 to 9) to view the other stored records.
3. Press the button or the button to call the desired number.
7.2 CALLER DETAILS SERVICE AND CALLER DISPLAY
If you subscribe to this feature from your service provider, you can see the phone numbers (if
available) of people calling you, before you answer.
The phone will store the numbers of the last 20 calls (both answered and missed). The record
number date and time of the call are recorded only if the telephone has a standard analog
telephone line (PSTN), but not for ISDN connections.
Whit idle handset, when there have been calls you haven’t answered, the symbol fl ashes on
the display.
Missed calls whose record has already been checked are indicated on the display with the
symbol coming up steadily.
Check the paragraph below to learn how to access the list.
NOTE:
• If your cordless has a PABX connection, the Caller Details Service is only active where the main
system can support this Service.
• The fi rst 25 digits of incoming calls are recorded.
BRAVO CORDLESS-2-lingue 6-09-2005, 16:0314