Operation Manual

Speak clearly into the microphone, in a normal tone - don't

shout

When you're finished speaking, release the TALK button.

To listen to another PMR user

Make sure you are not pressing the TALK button

Receiving symbol( ) is shown on the display when the other

person is speaking. Don't try to transmit until they have finished.

Monitoring the current channel

Normally Watch PMR will not pick up very weak signals. But you can

monitor the current channel for all sounds.

To activate the monitoring feature

Press the MENU and DOWN button at the same time

Your handset will pick up any signals on the current channel,

Including background noise.

Press TALK button to stop monitoring.

VOX(voice activated transmission)mode

In VOX mode your PMR will transmit whenever it detects your

voice (or other noise) without the TALK button pressed. It will

transmit for 2 seconds even if you stop talking.

The level of VOX sensitivity is shown by numbers on the display. At

the highest level(level 3), the handset will pickup softer noise

(including background noise); at the lowest level, it will pick up only

quite loud noise.

PTT