Operation Manual

Press TALK button to confirm the setting.

As long as the handset in VOX mode, VOX is shown steadily

on the display.

To turn VOX mode ON and OFF:

Press MENU button Three times

VOX icon display and OF flashes on the LCD panel.

Press UP button to set the level of sensitivity.

If you press the Down button until OF appear on the display,

you can turn off the VOX mode.

PTT

Ring tone

You can send ring tone to other handsets within range and tuned to

the same channel,(and sub-channel if applicable), to alert them you

want to communicate with them.

Press and release the CALL button

You can hear ring tone for about two seconds, while the

transmitting symbol( )and call signal( )appear on the LCD

panel. Any other PMR handset within the range and tuned to

same channel will hear Ring tone, and may decide to

to you.

the

transmit

Setting Call-Ring tones

Press MENU button for Four times, the unit will enter to

Call-Ring setting mode. The LCD will display CA while 1

is flashing.

Press UP or Down button to change the Call-Ring tone.

(5 different tones),the different Call-Ring tone can be heard

during changing.

Press TALK button to confirm your setting after you select

your desired Call-Tone.

PTT