Operation Manual

2. Fitting the Batteries

Your PMR includes 1.2V AA x 3 rechargeable

batteries for each units.

Insert your

fingernail

behind the tab

Lift the belt

clip off

To remove the belt clip

It is easier to fit the batteries without the belt clip

in place.

Pull the tab forward(away from the handset)

to release the belt clip. Then lift the belt clip

off.

To fit the batteries

3.Replace the cover and

close the screw clock wise.

2.Insert three batteries,

position the batteries

according to the polarity

marking on the plastic.

1.Loosen the screw counter

clock wise direction using

a coin & open the battery

compartment.

To replace the belt clip

Slide the belt clip down into the slot until it clicks

into place.