Operation Manual

3. Charging the rechargeable batteries

Plug the mains adaptor into

a 230V AC ,50Hz main socket

with the switch on the socket

set to OFF.

Lift the charge jack cover

located on the side of your unit.

Insert the round

connector of

the 7.5V DC/200mA

adaptor into the

charge jack.

Then switch ON the main socket.

The PMR must be used with mains adaptor,

provided with the unit.

Using any other adaptor will result in non -Compliance

with the EN60065 and will invalidate any approval to this

Apparatus.

During Charging, the battery level indicator icon will start scrolling

on the display in both clock mode and PMR on mode. When the

battery is fully charged in PMR on mode, the battery level icon will

stop scrolling.

It takes about 6 hours to recharge the battery fully if they've

become completely run down. New battery take up to 12 hours to

charge fully.