Operation Manual

Communication
You can communicate two ways with your new
PMR radio. There are 8 channels available to
you, You can either talk directly to others and
hear their response, or you can call or page
them with an audible tone.
The PMR radios can only communicate
when either the PTT button (for speach),
or the CALL button (for paging) is pressed.
The unit can only receive when both
buttons are fully released.
Receiving Communication
When your PMR unit is turned on and is not
being used to transmit voice communication
or pages, it is always in the listening mode.
You cannot receive any transmissions when
the PTT or CALL buttons are pressed, even if
you aren’t saying anything. Pressing these
buttons automatically overrides and turns off
the receive mode.
SCAN
mic
Turning On Your PMR
Push & hold the Power button for at least 2
seconds to turn the PMR radio ON or OFF. The
unit will beep, the LCD panel will display
information about your radio, and the panel will be
illuminated by a orange light for several seconds.
SCAN
mic
Operation
7