. Com Coupe Site tiles Motorized Float Congratulations an the purchase of your Little Tikes® Inflatable by PaolCandy@®. In order to get the best performance ‘from your product, we offer the following recommendations ta help increase its angularity and reduce potential damage. Little Tikes® Inflatables are designed using heavy-duty PYG materials, allowing the product ta perform best when properly inflated.
i . Com Coupe Site tiles Motorized Float CAUTIONS , WARNINGS 5 COMPANY INFORMATION SAFETY INSTRUCTIONS = Constant, competent adult supervision of children and other young users is required ot all times. = Never use this product as a lifesaving devices. = This product is designed for only one child at a time. This product is designed for pool uss and should not be used in large bodies of water. = Dg not jump onto or off of the product. = Do not dive info or off of the product.
i . Com Coupe Site tiles Motorized Float HOW to OPERATE THE COZY COUPE MOTORIZED FLOAT 1. Once the unit has been inflated, put the child into the inside the water. Once the child is securely in the inflated unit, push the power button to power on the motor. 2. Push the power button on the remote control and the red LED light should turn on confirming power. POWER LED FORWARD LEFT REVERSE POWER The Remote Control is very says te To go FORWARD, push the FORWARD button. operate.
i i Com Coupe little ti Motorized Float HOW to INFLATE YOUR COZY COUPE Inflate float unit fully through these four nozzle locations: Top of Canopy Back right Back left Canopy arm Canopy arm Main hod — Under float near back NOTE: DO NOT OVERINFLATED to avoid leaks or damage to the vehicle float.
Com Coupe Motorized Float 1. Use included screwdriver to remove the 2 Philips-head screws on the red clip on the back of the remote control. NOTE: Da not remove the other screws on the yellow part of the remote control housing. 2. Add 2 x AAA batteries into the battery compartment according to their polarity. 3. Place rad cover back onto battery compartment and reattach the 2 Philips-head screws. Make sure it is tight, hut take care not to over-tighten and strip the screws.
Com Coupe Motorized Float asd little kites, 1. Lay out the unit in front of you to work on . Turn compartment holder lock to the right . Remove battery compartment cover . Using included Philip-head screwdriver®, remove the six Philips screws from the battery holder cover. Then remove, the battery holder cover to reveal the battery holder underneath. * Tho screwdriver is atoll aly, tg sta part of predict.
i . Com Coupe Site tiles Motorized Float HOW to INSTALL BATTERIES into the VEHICLE §. Remove battery holder to Insert hatters 6. Insert 6x D-coll batteries according to their polarity Intel the battery holder. Each side of the holder accommodates 3 D-coll batteries. + — + Once the batteries have been inserted, place battery holder hack into the hatter Tf t=] compartment, and close the compartment following the instructions in reverse. Do not mix Od and Rew batteries.
. Com Coupe title kites, Motorized Float WARRANTY & FCC INFORMATION Limited 30-Day Warranty B&D Group, LLC, warrants to the original consumer that Its products are fro from any electrical or mechanical defects for a period of 30 days from the date of purchase. If any such defect Is discovered within the warranty period, BXD Group, LLC. will repair ar replace the wat free of charge upon receipt of the malt, shipping passage proposal and Insured to th factory address millrace from Customer Sarcastic.