Manual
Brookeld Engineering Laboratories, Inc. Page 17 Manual No. M/07-022-D0613
II.3 Speed Selection & Setting
Table II-1 shows the available speed selections.
DV-I PRIME SPEEDS SETS
Beginning 0.0
0.3
When scrolling 0.6
“UP” 1.5
3.0
6.0
12
30
60
0.0
0.5
1.0
2.0
2.5
4.0
5.0
10
20
50
100
Table II-1
NOTE: DV-I PRIME speeds are organized to conform to the historical speed sets available on
the Brookeld Dial Reading viscometer. Speeds from 0.3-60 RPM are traditionally
found on the LVT viscometer. Speeds from 0.5-100 RPM are traditionally found
on RVT, HAT, and HBT viscometers.
To select a viscometer speed rst press either the UP or DOWN ARROW keys which will cause the
area to the right of RPM (on the bottom line) to display the currently selected speed. Figure II-9
shows the DV-I PRIME had been operating at 10 RPM, and the current selected speed is 10 RPM.
cP 872.0 S01
10RPM10 % 87.2
“Selectable” Speed Operating Speed
Figure II-9