Owner manual

Brookfield Engineering Laboratories, Inc. Page 35 Manual No. M/98-211-A0701
program slot for use. The above screen would be updated to reflect the new selection. A press of
the 5,6,7,8 or 9 keys will place the user in the B.E.V.I.S. program download mode. The following
screen appears (assuming a press of the “5” key):
Figure 52
The user’s selection “5” is flashing and is the current slot selection. When ready, the user presses
the
ENTER key to begin the program download. The following screen will appear for the duration
of the download. See Section VI. RHEOLOADER for information on creating and downloading
B.E.V.I.S. programs.
Figure 53
 RUNNING B.E.V.I.S. PROGRAMS
Programs are run by pressing the “2” key when in Figure 50 which presents the user with the
following screen:
Figure 54
Here we see that our program is no. “3” and that a press of the ENTER key will start it running. As
soon as the program starts executing the user will be presented with:
Figure 55
This is a typical display for a given program step. The current step being executed (WTI0330) is
shown as well as the next step to be executed (PDN). The bottom line displays the current program