User guide

Brookeld Engineering Laboratories Inc. -  - Operating Instructions M09-086
B R O O K F I E L D E N G I N E E R I N G L A B O R ATORIES, INC.
11 Commerce Boule v a r d • M i d d l e b o r o , M A 0 2 3 4 6 U S A
ISO9001 CERTIFIED
T E L 5 0 8 - 9 4 6 - 6 2 0 0 o r 8 0 0 - 6 2 8 - 8 1 3 9 F A X 5 0 8 - 9 4 6 - 6 2 6 2
w w w . b r o o k f i e l d e n g i n e e r i n g . c o m
Boston • Chicago • London • Stuttgart • Dresden • Guangzhou
Enhanced UL Adapter for use with EZ-Lock
Assembly & Operating Instructions
No. M09-086
The Enhanced UL Adapter for use with EZ-Lock spindle coupling systems , as shown in Figure 1, is a kit consisting
of a spindle with coupling nut attached, sample chamber, mounting channel, and water jacket with mounting collar.
It is available in two versions: (1) with type 304 stainless steel suitable for most general purpose applications; (2)
with type 316 stainless steel for use with corrosive/acidic applications. All versions are shipped with the water
jacket (ULA-49EAY) mounted on the sample chamber.
The type 304 s/s UL Adapter (Part No. ULA-EY) may be used either as an “open tube” or “closed tube” system.
In the “open tube” method, the water jacket (ULA-49EAY) must be removed, allowing measurement in a beaker
or other suitable vessel. In the “closed tube” method, the sample is poured into the sample chamber with tube
end cap installed, which may be temperature controlled by direct immersion into a water bath or with the use of
the water jacket connected to a circulating water bath. The 316 s/s UL Adapter (Part No. ULA-EZY) has a closed
sample chamber with solid bottom and cannot be used as an open tube conguration.
The Enhanced UL Adapter may be ordered without the water jacket. Check your sales order to verify that you
have received the correct conguration for your Enhanced UL Adapter for use with EZ-Lock spindle coupling
system.
Figure 1: Enhanced UL Adapter Assembly for use with EZ-Lock Spindle Coupling Systems
ULA-49EAY
Water Jacket with
Mounting Collar
BR-3
Pivot Cup
(Part of
Lab Viscometer)
YULA-15EK (304 s/s)
YULA-15EKZ (316 s/s)
Spindle with
Coupling Nut
ULA-05EY
Clamp Knob
HT-19
Mounting
Screw (2)
ULA-10EK
Mounting Channel
Pin
ULA-02E
Clamping Collar
ULA-06E
Spring Plunger
ULA-31EY (304 s/s, open tube)
ULA-31EYz (316 s/s, closed tube)
Sample Chamber
ULA-34
Tube End Cap
(Not required with
ULA-31EYZ Sample Chamber)
Enhanced UL Adapter
for use with EZ-Lock Instruments
(shown with DV-II+Pro Viscometer - similar assembly on
other model viscometers/rheometers)