TM ® SIMP HOME LIFE BY DESIG N TM DRAPER / BAXTER / TIERNEY SINGLE DOOR WALL CABINET MODEL # AXCBCDRP-03 1/19
TM ® SIMP HOME LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION . PART DESCRIPTION A MODEL # AXCBCDRP-03 . . BL BR /oFrnt Anatv Anatv /oFrnt Anatv /oFrnt TOP & BOTTOM QTY 2 . LEFT SIDE QTY 1 . C RIGHT SIDE QTY 1 . D MIDDLE SHELF QTY 1 . E SHELF QTY 1 . F . G WALL MOUNT BAR QTY 1 BACK BAR QTY 1 H TOP BACK PANEL QTY 1 BOTTOM BACK PANEL QTY 1 . I DOOR QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION . MODEL # AXCBCDRP-03 HARDWARE DESCRIPTION 1 2 . CAM LOCK PIN CAM LOCK QTY 14 SETS . . 3 WOOD DOWEL Ø8 X 30mm QTY 4 . 4 ADJUSTABLE HINGE QTY 2 . 5 . 7 . 8 9 PHILLIPS SCREW ROUND HEAD M4 X 15mm QTY 2 PHILLIPS SCREW M4 X 15mm QTY 16 . PHILLIPS SCREW M4 X 50mm QTY 3 SHELF SUPPORT QTY 4 MAGNET AND PLATE QTY 1 SET . 6 PHILLIPS SCREW M3 X 15mm QTY 4 .
COMPONENTS-KEY DIAGRAM /oFnrt MODEL # AXCBCDRP-03 A nA tav F E I G Fo/rnt Fo/rnt Aavnt Aavnt D BR BL C H /oFnrt nA tav A 7/19
ASSEMBLY MODEL # AXCBCDRP-03 P STEP-1 X 1 1 1 1 Avant For/nt Avant For/nt A A 1 1 Avant For/nt BR 9 1 4 1 Avant For/nt BL 2 E 2 2 1. Attach Cam Lock Pins 1 into pre-drilled holes on parts A , BL , BR . 2.AttachMagnet4usingPhilpsScrews9intopre-driledholesonLeftSideBL. 3. Use Phillips screwdriver to secure Cam Lock Pins and Screws. Do not over-tighten. 4. Insert Dowels 2 into guide holes on part E . 5. Use rubber mallet to tap Dowels 2 into bottom of holes securely.
ASSEMBLY MODEL # AXCBCDRP-03 STEP-2 BL /onFrt n taA v E C 1 1 BL /onFrt n taA v E C 1 1. Align Wood Dowels and Cam Lock Pins with guide holes and attach parts C , E to Left Side BL . 2. Insert Cam Locks 1 into guide holes on each part C , E . 3. Use Phillips screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXCBCDRP-03 STEP-3 E /onFrt BR n taA v /onFrt n taA v C BL 1 E /onFrt 1 n taA v BR /onFrt BL n taA v C 1 1 1. Repeat Step-2 for the Right Side BR .
ASSEMBLY MODEL # AXCBCDRP-03 STEP-4 E /onFrt n taA v /onFrt n taA v BL BR /onFrt n taA v A 1. Align Cam Lock Pins with guide holes and attach part A to Sides BL , BR . Aanvt 1 /oFrnt Aanvt /oFrnt BL BR A 2. Insert two Cam Locks 1 into guide holes on each Side BL , BR . 3. Use Phillips screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXCBCDRP-03 STEP-5 Warning Label E Front / Avan t G BL BR H A 1.SlideBackPanelsG,HfirmlyintoslotsonSidesBL,BRandBottomA.
ASSEMBLY MODEL # AXCBCDRP-03 STEP-6 A ntaAv /onFrt ntaAv ntaAv /onFrt /onFrt BL 1. Align Cam Lock Pins with guide holes and attach part A to parts BL , BR . BR ntaAv /onFrt 1 A BL BR 1 2. Insert Cam Locks 1 into guide holes on each part BL , BR . 3. Use Phillips screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXCBCDRP-03 Note: Thebackofthecabinetframedoesnothave pre-driledholestoattachthebackpanels. STEP-7 /oFrnt Anatv /oFrnt Anatv 8 G 7 H 11 1. Attach the Back Panels G , H to back frame using Phillips Screws Round Head 8 through guide holes from Back Panels. 2. Attach the Corners Support 11 to back frame using Phillips Screws 7 through guide holes from Corners Support 11 . 3. Use Phillips Screwdriver to tighten screws. Do not over-tighten. STEP-8 Anatv /oFrnt D Anatv /oFrnt 5 1.
ASSEMBLY MODEL # AXCBCDRP-03 STEP-9 I 4 9 7 3 1. Attach Adjustable Hinges 3 to Door I using Phillips Screws 7 into pre-drilled holes on Door I . 2.AttachMagnetPlate4totopcornerofDoorIusingPhilpsScrews9into pre-driledholesonDoorI. STEP-10 BR 3 I 7 1. Attach Adjustable Hinges 3 on Door I to Right Side BR using Phillips Screws 7 into pre-drilled holes on Right Side BR . 2. Use Phillips screwdriver to snugly tighten screws.
ASSEMBLY MODEL # AXCBCDRP-03 STEP-11 IMPORTANT NOTE: 7 II I Tighten the Screw marked II to fasten hinge. The door may need to be adjusted so that all the spaces between the door and the unit sides are equal. To adjust, follow instructions: 1. Side adjustment 4 mm To move the door towards the side panel, loosen screw I and tighten screw II . To move the door away from the side panel, loosen screw II and tighten screw I . 2.
ASSEMBLY MODEL # AXCBCDRP-03 STEP-12 - Positioning F c a b 10 1. Determine the location for the unit on the wall. The Top A should be approximately 1 ¼” above the top of the Wall Mount Bar F when mounted. 2. Place the Wall Mount Bar F at the predetermined height. Use a level to ensure that it is straight. The flat side of Wall Mount Bar F should face outward away from the wall. Hole (b) should align with your studs. Carefully mark the position of each hole using the tip of the Phillips Screw 6 . 3.
ASSEMBLY MODEL # AXCBCDRP-03 STEP-14 F F F 1. Align the top of the Wall Mount Bar F with the bottom of the angled bracket on the back of the Cabinet. 2. Gently slide the Cabinet down on to the Wall Mount Bar F .
TM ® SIMP HOME LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
