Installation Guide

/2210
STEP-2
ASSEMBLY
MODEL # AXCBCDRP-04
1. Attach Magnets 4 using Phillips Screws 9 into pre-drilled holes Divider E .
2. Use
Phillips screwdriver
to secure screws
.
Do not over-tighten.
3. Insert Dowels 2 into guide holes on each part E , G .
4. Use rubber mallet to tap Dowels 2 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
2
Front /
Avant
2
2
G
E
4
9
9