Full Product Manual

STEP-3

1. Align Drawer Back N with Drawer Bottom O and press firmly into slot .

2. Attach Drawer Back using 2 Allen Key Screws 2 through guided holes on

each Side ML , MR .

3. Use Allen Key 5 to tighten screws. Do not over-tighten.

1. Use Phillips screwdriver to attach Handle 4 to Drawer Front L .

STEP-4

NOTE: The screwdriver is not

included in the hardware pack.

Repeat Step 1-4 for the second drawer .

10/27

ASSEMBLY MODEL # AXCBED-04BR