User's Manual

INSTALLATION 4
17
Transponder Reader – CF-Card, Release 1.1
4 INSTALLATION
4.1 Installation Environment
This device is designed for use in an indoor
environment only. Installation is only permitted in
an environmental indoor climate with a constant
temperature of between 0°C and +50°C / 32°F and
122°F, humidity between 25% and 80%, and a
maximum temperature of +50°C / 122°F.
Do not install or use this device in or near water.
Never spill liquids of any kind onto the device.
Should spillage occur, unplug the device and have
it checked by a technician.
Do not install near heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat. Do not install the
device in a flammable environment.
Never expose the device to intense changes in
temperature, otherwise condensation can develop
inside the device and cause damages.
The device should not be used in the immediate
vicinity of electrical units (such as medical units,
monitors, telephones, televisions and energy-saver
lamps), magnetic data carriers, or metallic objects.
This could result in reduced reading/writing ranges.
Never use the device in potentially explosive areas
(such as paint shops).
Do not position the device in a location where it
can suffer from vibration or shock.