Product Info

10
FOUP Read/Write Station – Stand Alone, Release 1.0
5 APPLICATION FLOW
To transfer the FOUP data from barcode label to the RF tag, the FOUP
have to be placed on the unit. The optical sensor detects the FOUP and
the station will be switched to operation mode. There are different
modes to transfer the data from barcode to RF tag.
The Manual Mode for reading the barcode and reading and writing the
tag independently from each other.
Automatic Mode and Full Automatic Mode are used to read the barcode
and then copy the data to the tag automatically.
In normal case the barcode ID will be read from the FOUP label. After
that the ID will be written to the RF tag at the FOUP. Then one or more
pages of the tag will be locked and the ID will be stored on a file on the
CF card.