User's Manual

Product Manual - RFID Reader UF70 Certum 138
Chapter 7
Operation
Parameter 105
(0x69)
Channel Switching Mode
This parameter defines if the global ETSI channel list is used or if each port has its
own channel list.
Value range: 0x00 to 0x01
0x00 Use global ETSI channel list
0x01 Use the ETSI channel list of the respective antenna port
Default: 0x00
Parameter 106
(0x6A)
Transmission Output Antenna Port 1
This value defines the transmission output of antenna port 1.
Value range:
0x00 (0 dBm) The port is disabled.
0x44 to 0x84 (17 dBm to 33 dBm; increment 0.25 dBm)
Default: 0x6C (27 dBm)
Parameter 107
(0x6B)
Transmission Output Antenna Port 2
This value defines the transmission output of antenna port 2.
Value range:
0x00 (0 dBm) The port is disabled.
0x44 to 0x84 (17 dBm to 33 dBm; increment 0.25 dBm)
Default: 0x00 (0 dBm)
Parameter 108
(0x6C)
Transmission Output Antenna Port 3
This value defines the transmission output of antenna port 3.
Value range:
0x00 (0 dBm) The port is disabled.
0x44 to 0x84 (17 dBm to 33 dBm; increment 0.25 dBm)
Default: 0x00 (0 dBm)
Parameter 109
(0x6D)
Transmission Output Antenna Port 4
This value defines the transmission output of antenna port 4.
Value range:
0x00 (0 dBm) The port is disabled.
0x44 to 0x84 (17 dBm to 33 dBm; increment 0.25 dBm)
Default: 0x00 (0 dBm)