User's Manual

Product Manual - RFID Reader UF70 Certum 147
Chapter 7
Operation
Parameter 149
(0x95)
RF Interface Multipower Tag Access 1
Variation of the power at antenna port 1 in order e.g. to detect EPC transponders
in the immediate antenna vicinity better.
Value range: 0x00 (disabled) to 0xFF (enabled)
Default: 0xFF
Parameter 150
(0x96)
RF Interface Multipower Tag Access 2
Variation of the power at antenna port 2 in order e.g. to detect EPC transponders
in the immediate antenna vicinity better.
Value range: 0x00 (disabled) to 0xFF (enabled)
Default: 0xFF
Parameter 151
(0x97)
RF Interface Multipower Tag Access 3
Variation of the power at antenna port 3 in order e.g. to detect EPC transponders
in the immediate antenna vicinity better.
Value range: 0x00 (disabled) to 0xFF (enabled)
Default: 0xFF
Parameter 152
(0x98)
RF Interface Multipower Tag Access 4
Variation of the power at antenna port 4 in order e.g. to detect EPC transponders
in the immediate antenna vicinity better.
Value range: 0x00 (disabled) to 0xFF (enabled)
Default: 0xFF
Parameter 153
(0x99)
RF Interface Max Allowed Antenna Output Power 1
The reader limits the power at antenna port 1 to the here defined maximum
antenna output power.
Value range: 0x00 (0 dBm (erp)) to 0xFF (63.75 dBm (erp))
Default: 0x84 (33 dBm (erp))
Parameter 154
(0x9A)
RF Interface Max Allowed Antenna Output Power 2
The reader limits the power at antenna port 2 to the here defined maximum
antenna output power.
Value range: 0x00 (0 dBm (erp)) to 0xFF (63.75 dBm (erp))
Default: 0x84 (33 dBm (erp))