User's Manual

Product Manual - RFID Reader UF70 Certum 148
Chapter 7
Operation
Parameter 155
(0x9B)
RF Interface Max Allowed Antenna Output Power 3
The reader limits the power at antenna port 3 to the here defined maximum
antenna output power.
Value range: 0x00 (0 dBm (erp)) to 0xFF (63.75 dBm (erp))
Default: 0x84 (33 dBm (erp))
Parameter 156
(0x9C)
RF Interface Max Allowed Antenna Output Power 4
The reader limits the power at antenna port 4 to the here defined maximum
antenna output power.
Value range: 0x00 (0 dBm (erp)) to 0xFF (63.75 dBm (erp))
Default: 0x84 (33 dBm (erp))
Parameter 157
(0x9D)
Tag Comm Use Pilot Tone
Transponder pilot tone on and off.
Value range: 0x00 (off) or 0xFF (on)
Default: 0xFF
Parameter 158
(0x9E)
Tag Comm Initial Q
The initial Q results from the number of anticipated transponders (anticipated
transponder number = 2Q).
Value range: 0x00 to 0x0F
Default: 0x03
Parameter 159
(0x9F)
Tag Comm Session
Defines the transponder session to be applied (see Gen2 EPCglobal Standard).
Value range: 0x00 to 0x03
Default: 0x02
Parameter 160
(0xA0)
Tag Comm Max Errors
Number of repeat attempts of an air interface command when an anticipated
command response remains pending.
Value range: 0x00 to 0xFF
Default: 0x05