User's Manual

Table Of Contents
Product Manual - RFID Reader UF80 6
Contents
6.5.2 Available antenna types 28
6.6 Power supply 28
6.7 Ethernet interface 10/100 BaseT 29
6.8 Commissioning 29
6.8.1 Required operating conditions 29
6.8.2 Brooks Device Discoverer 29
7 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
7.1 Operating personnel 31
7.2 Communication protocol ASC-I1 31
7.2.1 Structure of the communication protocol 31
7.2.2 Package contents 31
7.2.3 Commands of protocol 33
7.2.4 Parameter 64
7.3 Additional information 69
8 Service and Troubleshooting . . . . . . . . . . . . . 70
8.1 General remarks 70
8.2 Qualified troubleshooting personnel 71
8.3 Safety instructions 71
8.4 Error codes 72
8.5 Error display with LEDs 74
8.6 Reader does not respond 74
8.7 Reset 75
8.8 Power cut 75
8.9 SCT configuration transponder 75
8.10 Software releases 76
8.11 Customer service 77
9 Dismantling and Storage . . . . . . . . . . . . . . . . 78
9.1 Dismantling 78
9.2 Storage 78
10 Transport and Disposal . . . . . . . . . . . . . . . . . 79
10.1 Transport 79
10.2 Disposal 79