User Manual

1-4
Section 1 Installation
Brooks
®
Model 0260 Secondary Electronics
Quick Start Guide
X-SW-0260-QS-eng
Part Number: 541B157AAG
October, 2010
9. The USB to serial driver is installed silently, if you want to rerun the USB
to serial driver install you can execute ‘USBDriverSetup.exe’ in folder
‘<Program Files>\Brooks Instrument\SmartInterface\USB Drivers’
10.In case you need to manually install the USB to serial driver you can find
the driver installation files in:
<Program Files>\Brooks Instrument\SmartInterface\USB Drivers
11.Once you’ve dismissed the ‘Finished’ screen, the installation of the
Smart Interface is complete. The Smart Interface application can be
started by using the shortcut in the ‘Start->All Programs’ menu or the
icon on the desktop shown below. Note that you need to insert the USB
security dongle into a USB port in order to run the Smart Interface
application.
12.Start the Smart Interface application and visit the ‘Help->Quick Start
Guide’ to quickly get familiar with the software application setup.