Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Models 1350E and 1355E Sho-RateTM "50" Model 1350E and Sho-RateTM "150" Model 1355E Sizes 2-6 Model 1350E Sho-Rate "50" (no valve) Model 1355E Sho-Rate "150" (no valve) Model 1350E Sho-Rate "50" With optional Integral flow controller Model 1355E Sho-Rate "150" With optional Integral flow controller Model 1350E Sho-Rate "50" With optional needle valve Model 1355E Sho-Rate "150" With optional needle valve
Models 1350E and 1355E Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012
Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Models 1350E and 1355E Dear Customer, We appreciate this opportunity to service your flow measurement and control requirements with a Brooks Instrument device. Every day, flow customers all over the world turn to Brooks Instrument for solutions to their gas and liquid low-flow applications.
Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Models 1350E and 1355E THIS PAGE WAS INTENTIONALLY LEFT BLANK
Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Contents Models 1350E and 1355E Section 1 Introduction Paragraph Page Number Number 1-1 Description ................................................................................................................................................. 1-1 1-2 Specifications .............................................................................................................................................
Contents Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Models 1350E and 1355E THIS PAGE WAS INTENTIONALLY LEFT BLANK ii
Section 1 Introduction Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Models 1350E and 1355E 1-1 Description The Sho-Rate Flowmeters are variable area, glass tube, flow rate indicating meters. The basic elements are a tapered glass metering tube and a metering float. Features include quick and simple removal or installation of the tube and float while the meter remains in the process piping.
Section 1 Introduction Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Models 1350E and 1355E Flow Meter Assembly Scales 1350 Series: Length: 65 mm, nominal Graduations: Standard: R-65mm, or R-100 linear reference scale with air or water calibration table. 1355 Series: Length: 150mm, nominal Graduations: Standard: R-150 mm, or R-100 linear reference scale with air or water calibration table.
Section 1 Introduction Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Models 1350E and 1355E Table 1-1 Capacities for Sho-Rate Model 1350E Rib Guided Tubes, Spherical Floats Table 1-2 Tube and Float Code, Detachable Scale Option, 1st Digit Table 1-3 Tube and Float Code, Detachable Scale Option, 2nd & 3rd Digits 1-3
Section 1 Introduction Models 1350E and 1355E Table 1-4 Capacities for Sho-Rate Model 1355E Rib Guided Tubes, Spherical Floats NOTE: ALL AIR FLOWS ARE AT 14.7 PSI A AND 70 DEGREES F. * FLOW RATES SHOWN ARE MAXIMUM CAPACITIES DIRECT READ SCALES MAY END AT SLI GHTLY DIFFERENT MAXIMUM FLOWS.
Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Section 1 Introduction Models 1350E and 1355E 1-3 Optional Equipment Standard Needle Valve The standard needle valve can be supplied integrally mounted to the inlet or outlet of the instrument. For more details on the needle valve go to our website: BrooksInstrument.com, select Documentation, Precision Valves & Flow Controllers, select Brooks-Line IV, CART, 8503 or 8504 valves.
Section 1 Introduction Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Models 1350E and 1355E THIS PAGE WAS INTENTIONALLY LEFT BLANK 1-6
Section 2 Installation Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Models 1350E and 1355E 2-1 Receipt of Equipment When the equipment is received, the outside of the packing case should be checked for any damage incurred during shipment. If the packing case is damaged, the local carrier should be notified at once regarding his liability. Remove the envelope containing the shipping list.
Section 2 Installation Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Models 1350E and 1355E 2-3 Return Shipment Do not return any assembly or part without a Return Materials Report. The Return Materials Report is available from all District Sales Offices and the Product Service Department, Hatfield, PA 19440. Information describing the problem, corrective action, if any, and the work to be accomplished at the factory must be included. Brooks Instrument 407 W.
Section 2 Installation Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Models 1350E and 1355E 2-5 Installation (See Figures 2-1, 2-2, 2-3, 2-4 and 2-5) The flowmeter should be mounted within 6° of true vertical. The inlet connection to the flowmeter is in the bottom end fitting. The connections are normally horizontal, female NPT. Be sure the piping is adequately supported to prevent undue strain on the meter.
Section 2 Installation Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Models 1350E and 1355E Model 1350E-V (Valve Inlet) (Cartridge Open) Model 1350E-VB (Valve Inlet with Aluminum Bezel) Inches/Milimeters 2-4 Figure 2-2 Dimensions - Sho-Rate 1350E
Section 2 Installation Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Models 1350E and 1355E 3.00 [76.0] MODEL SCALE A A B B C NO LENGTH OPEN MM INCH MM INCH MM INCH 1350 65 7.31 185.7 4.34 110.3 2.50 1355 150 11.72 297.7 8.75 222.2 2.50 NOTE: ALL BOLT HOLES TO STRADDLE REGULATING VALVE DIMENSIONS ARE INCH [ MM ] 31.8 [3.0] OUTLET CONN F 1350+1355 SHO-RATE 1.00 SQ. 25.4 PLASTIC SHIELDING C CLSD INCH 2.17 2.17 INLET CONN. CONN. SIZE E INCH 1/8 NPT 1.
Section 2 Installation Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Models 1350E and 1355E Model 1355E-V (Valve Inlet ) 8.
Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Section 3 Operation Models 1350E and 1355E 3-1 Operation After the flowmeter has been installed in the flow system, it is ready for operation. An optional built-in needle control valve may be provided to control the flow through the flowmeter. These control valves are designed for fine control. Excessive tightening may damage the valve seat and limit its effectiveness as a control valve.
Section 3 Operation Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012 Models 1350E and 1355E THIS PAGE WAS INTENTIONALLY LEFT BLANK 3-2
Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AHG August, 2012 Section 4 Maintenance Models 1350E and 1355E 4-1 Disassembly and Cleaning It is recommended the user periodically inspect the tube and float, and clean if necessary. Dirt or foreign materials adhering to the tube and float may cause inaccuracy and sticking of the float. The metering tube (Borosilicate glass) and related parts may be cleaned with any solvent which does not attack glass.
Section 4 Maintenance Models 1350E and 1355E Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AHG August, 2012 4-2 Reassembly Procedure a.Use the reverse of Steps a through f of the disassembly procedure to reassemble the meter. b.Prior to installing the needle control valve assembly make certain that the valve stem is turned completely counterclockwise (full open position) to prevent damage to the valve seat.
Section 5 Parts List Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August 2012 Models 1350E and 1355E 5-1 General When ordering parts please specify: Brooks Serial Number Model Number Part Number Description and Quantity (Refer to Figure 5-1 and Table 5-1) 5-1
Section 5 Parts List Models 1350E and 1355E Figure 5-1 Parts Drawing Sho-Rate Models 1350E and 1355E 5-2 Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2012
Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August 2012 Section 5 Parts List Models 1350E and 1355E Table 5-1 Parts List - Sho-Rate Models 1350E and 1355E 5-3
Installation and Operation Manual Section A - Essential Instructions X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Bulgarian Ɉɫɧɨɜɧɢ ɢɧɫɬɪɭɤɰɢɢ ɉɪɨɱɟɬɟɬɟ ɩɪɟɞɢ ɪɚɛɨɬɚ! Brooks Instrument ɩɪɨɟɤɬɢɪɚ, ɩɪɨɢɡɜɟɠɞɚ ɢ ɬɟɫɬɜɚ ɩɪɨɞɭɤɬɢɬɟ ɫɢ ɩɨ ɬɚɤɴɜ ɧɚɱɢɧ, ɱɟ ɬɟ ɞɚ ɨɬɝɨɜɚɪɹɬ ɧɚ ɦɧɨɝɨɛɪɨɣɧɢ ɧɚɰɢɨɧɚɥɧɢ ɢ ɦɟɠɞɭɧɚɪɨɞɧɢ ɫɬɚɧɞɚɪɬɢ.
Section A - Essential Instructions Installation and Operation Manual X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Czech Základní instrukce PĜed instalací si pĜeþtČte následující instrukce! Spoleþnost Brooks Instrument konstruuje, vyrábí a testuje tento produkt tak, aby splnil mnoho národních a mezinárodních standardĤ. PĜístroje musí být ĜádnČ nainstalovány, používány a udržovány tak, aby byl zajištČn jejich nepĜetržitý provoz v rámci normálních technických specifikací.
Installation and Operation Manual Section A - Essential Instructions X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Dansk Grundlæggende vejledninger Læs disse før anvendelse! Brooks Instruments designer, fremstiller og afprøver sine produkter således, at de tilpasser sig både de indenrigs og internationale standarder. Disse udstyr bør installeres, bruges og repareres omhyggeligt, så at de kan virke tilsvarende deres normale anvendelsesperiode.
Section A - Essential Instructions Installation and Operation Manual X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Dutch Essentiële instructies Lees ze voordat u verder gaat! Brooks Instrument ontwerpt, produceert en test haar producten zodanig dat ze voldoen aan vele nationale en internationale normen. Deze producten moeten correct worden geïnstalleerd, bediend en onderhouden zodat ze binnen hun normale specificaties blijven werken.
Section A - Essential Instructions Installation and Operation Manual X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Estonian Olulised juhised Enne kasutamist lugege hoolikalt läbi! Brooks Instrument konstrueerib, valmistab ja katsetab oma tooteid selliselt, et need vastaksid paljude erinevate riiklike ja rahvusvaheliste standardite nõuetele. Ainult nõuetekohane paigaldamine, kasutamine ja hooldamine tagab toodete katkematu talitluse tavaspetsifikatsiooni raames.
Section A - Essential Instructions Installation and Operation Manual X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Finnish Perusohjeet Lue ensin ohjeet huolellisesti! Brooks Instrument suunnittelee, valmistaa ja testaa laitteensa vastaamaan useimpien kotimaisten ja kansainvälisten standardien vaatimuksia. Tuotteet tulee asentaa, käyttää ja huoltaa käyttöohjeiden mukaan jotta niiden toimivuus taataan.
Installation and Operation Manual X-VA-1350E-eng Part Number:541B082AAG August, 2012 Section A - Essential Instructions Models 1350E and 1355E French Instructions essentielles A lire avant de commencer ! Brooks Instrument conçoit, fabrique et teste ses produits pour répondre à de nombreuses normes nationales et internationales. Ces produits doivent être correctement installés, utilisés et entretenus pour pouvoir fonctionner dans le cadre de leurs spécifications normales.
Section A - Essential Instructions Installation and Operation Manual X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E German Wichtige Anweisungen Bitte zuerst lesen! Brooks Instrument entwickelt, produziert und testet seine Produkte derart, dass sie viele nationale und internationale Standards erfüllen. Nur bei korrektem Einbau sowie richtiger Bedienung und Wartung dieser Produkte ist ein Betrieb unter Einhaltung der Standardvorgaben sichergestellt.
Installation and Operation Manual Section A - Essential Instructions X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Greek ǺĮıȚțȑȢ ȠįȘȖȓİȢ ǻȚĮȕȐıIJİ ʌȡȚȞ ıȣȞİȤȓıİIJİ! Ǿ Brooks Instrument ıȤİįȚȐȗİȚ, ʌĮȡȐȖİȚ țĮȚ įȠțȚȝȐȗİȚ IJĮ ʌȡȠȧȩȞIJĮ IJȘȢ ıİ ıȣȝȝȩȡijȦıȘ ȝİ ʌȜȒșȠȢ İșȞȚțȫȞ țĮȚ įȚİșȞȫȞ ʌȡȠIJȪʌȦȞ. Ǿ ıȦıIJȒ İȖțĮIJȐıIJĮıȘ, ȤȡȒıȘ țĮȚ ıȣȞIJȒȡȘıȒ IJȠȣȢ ĮʌȠIJİȜİȓ ĮʌĮȡĮȓIJȘIJȘ ʌȡȠȨʌȩșİıȘ IJȘȢ ȜİȚIJȠȣȡȖȓĮȢ İȞIJȩȢ IJȦȞ țĮȞȠȞȚțȫȞ ȠȡȓȦȞ.
Section A - Essential Instructions Installation and Operation Manual X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Hungarian AlapvetĘ utasítások ElĘször olvassa el ezeket! A Brooks Instrument olyan módon tervezi, gyártja és teszteli termékeit, hogy azok megfeleljenek számos belföldi és nemzetközi szabványnak. Ezeket a berendezéseket megfelelĘen kell telepíteni, üzemeltetni és karbantartani ahhoz, hogy mindenképpen a normál mĦködési tartományuknak megfelelĘen üzemelhessenek.
Installation and Operation Manual Section A - Essential Instructions X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Italian Istruzioni fondamentali Leggerle subito! La Brooks Instrument progetta, fabbrica e collauda i propri prodotti in maniera tale che siano conformi ai vari standard nazionali ed internazionali.
Section A - Essential Instructions Installation and Operation Manual X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Latvian SvarƯga instrukcija Pirms turpinƗt izlasiet! „Brooks Instrument” projektƝ, ražo un pƗrbauda savus ražojumus atbilstoši daudziem nacionƗlajiem un starptautiskajiem standartiem. Lai nodrošinƗtu šo izstrƗdƗjumu turpmƗku darbƯbu atbilstoši noteiktajiem parametriem, tie ir pareizi jƗuzstƗda, jƗlieto un jƗapkopj.
Section A - Essential Instructions Installation and Operation Manual X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Lithuanian Pagrindinơs instrukcijos Perskaitykite prieš tĊsdami! „Brooks Instrument“ projektuoja, gamina ir išbando savo gaminius, kad jie atitiktǐ Ƴvairius nacionalinius ir tarptautinius standartus. Šie gaminiai turi bnjti tinkamai montuojami, eksploatuojami ir prižinjrimi, kad ir toliau veiktǐ pagal jiems bnjdingus techninius parametrus.
Section A - Essential Instructions Installation and Operation Manual X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Polish Zalecenia wstĊpne Prosimy przeczytaü przed rozpoczĊciem uĪytkowania! Brooks Instrument projektuje, wytwarza i testuje swoje produkty tak, aby speániaáy wymagania licznych norm krajowych i miĊdzynarodowych. Te produkty muszą byü poprawnie instalowane, obsáugiwane oraz konserwowane, aby zapewniü ich prawidáowe dziaáanie zgodnie ze specyfikacją techniczną.
Installation and Operation Manual Section A - Essential Instructions X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Portuguese Instruções Básicas Ler antes de proceder! A Brooks Instrument projecta, fabrica e testa os seus produtos de forma a satisfazer numerosas normas nacionais e internacionais. Estes equipamentos devem ser instalados, utilizados e mantidos de forma adequada, e devem funcionar dentro da sua gama de utilização.
Section A - Essential Instructions Installation and Operation Manual X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Romanian IndicaĠii de referinĠă CitiĠi-le întâi pe acestea! Brooks Instrument îúi proiectează, produce úi testează produsele într-un mod ce respectă un mare număr de standarde autohtone úi internaĠionale.
Installation and Operation Manual Section A - Essential Instructions X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Slovak Základné príkazy PreþítaĢ pred inštaláciou! Brooks Instrument svoje výrobky projektuje, vyrába a testuje takým spôsobom, aby tieto vyhoveli domácim aj medzinárodným normám. Tieto zariadenia je potrebné predpísaným spôsobom inštalovaĢ, prevádzkovaĢ a udržiavaĢ, na zabezpeþenie ich spoĐahlivej a normálnej prevádzky v celom pracovnom rozsahu.
Section A - Essential Instructions Installation and Operation Manual X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Slovene Osnovna navodila Najprej preberite jih Brooks Instrument tako konstruira, izdeluje in terstira svoje izdelke, da oni ustrezajo številnim domaþim in mednarodnim standardom. Te naprave se morajo ustrezno instalirati, koristiti in vzdrževati, da vsekakor delajo ustrezno normalnom podroþju funkcioniranja.
Section A - Essential Instructions Installation and Operation Manual X-VA-1350E-eng Part Number:541B082AAG August, 2012 Models 1350E and 1355E Spanish Instrucciones básicas ¡Léalos primero! El Brooks Instrument proyecta, fabrica y prueba sus productos de manera que éstos respondan a numerosas normas nacionales e internacionales. Dichas instalaciones deben ser emplazadas, operadas y mantenidas adecuadamente, para que puedan marchar de todas formas en conformidad con el alcance normal de funcionamiento.
Section A - Essential Instructions Installation and Operation Manual Models 1350E and 1355E X-VA-1350E-eng Part Number:541B082AAG August, 2012 Swedish Väsentliga anvisningar. Läs detta innan du fortsätter ! Brooks Instrument konstruerar, tillverkar och testar sina produkter med syfte att uppfylla alla nationella och internationella standarder. Dessa produkter måste installeras på rätt sätt, handhas och underhållas för att de skall fungera kontinuerligt enligt deras normala specifikation.
Models 1350E and 1355E Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG August, 2011 LIMITED WARRANTY Seller warrants that the Goods manufactured by Seller will be free from defects in materials or workmanship under normal use and service and that the Software will execute the programming instructions provided by Seller until the expiration of the earlier of twelve (12) months from the date of initial installation or eighteen (18) months from the date of shipment by Seller.
