Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Flow Controllers for Gas and Liquid Service Brooks® Flow Controllers for Gas and Liquid Service Model FC 8744, Series FC 8800 and FC 8900 Model FC 8800 Flow Controller Model 1350 with FC 8900 Flow Controller Model FC 8744 Flow Controller
Flow Controllers for Gas and Liquid Service Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Essential Instructions Read before proceeding! Brooks Instrument designs, manufactures and test s its products to meet many national and international st andards. These products must be properly installed, operated and maint ained to ensure they continue to operate within their normal specifications.
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Flow Controllers for Gas and Liquid Service Dear Customer, We appreciate this opportunity to service your flow measurement and control requirements with a Brooks Instrument device. Every day, flow customers all over the world turn to Brooks Instrument for solutions to their gas and liquid low-flow applications.
Flow Controllers for Gas and Liquid Service THIS PAGE WAS INTENTIONALLY LEFT BLANK Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Contents Flow Controllers for Gas and Liquid Service Paragraph Page Number Number Introduction Section 1 1-1 Description ..................................................................................................................................... 1-1 1-2 Design Features .............................................................................................................................
Contents Flow Controllers for Gas and Liquid Service THIS PAGE WAS INTENTIONALLY LEFT BLANK ii Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Section 1 Introduction Flow Controllers for Gas and Liquid Service 1-1 Description Brooks® flow controllers are designed to maintain a constant differential pressure across an integral, manual flow regulating valve. The incoming fluid pressure on one side of the diaphragm, and outlet pressure plus spring action on the other side, position an internal diaphragm-actuated control valve.
Section 1 Introduction Flow Controllers for Gas and Liquid Service Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Pressure Equipment Directive (97/23/EC) Equipment falls under Sound Engineering Practice (SEP) according to the directive. Pressure Drop Refer to Table 1-2. Materials of Construction Controller Body: 316 Stainless Steel, Brass or Aluminum (FC 8744 only). Refer to Table 1-3. Controller Diaphragm: Buna-N, Teflon® or Viton® fluoroelastomers Refer to Table 1-3.
Section 1 Introduction Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Flow Controllers for Gas and Liquid Service Table 1-1 Flow Ranges Flow Ranges Valve Low Medium High High Flow NRS 1 NRS 2 NRS 3 NRS 4 NRS 5 NRS 6 FC 8830 High Flow Flow Ranges Model FC 8800 FC 8802 FC 8805 FC 8812 / FC 8815 FC 8840 FC 8842 FC 8845 Model FC 8900 FC 8902 FC 8905 FC 8912 / FC 8915 FC 8940 FC 8942 FC 8945 FC 8744 Valve Low Medium High High Flow NRS 1 NRS 2 NRS 3 NRS 4 NRS 5 NRS 6 NRS
Section 1 Introduction Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Flow Controllers for Gas and Liquid Service Table 1-3 Materials of Construction / Connection / Valve Option Model Item Body/Diaphragm/Valve Seat & O-ring Brass/Viton Brass/Buna/Buna-N SS/Teflon SS/Viton Alum/Buna-N Connection Size and Type 1/4" -NPT F 1/8" -NPT F 1/8" Tube Compression 1/4" ube ompression T C 1/4" I.D.
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Section 1 Introduction Flow Controllers for Gas and Liquid Service Figure 1-4 Dimensional Drawing Model FC 8744 Figure 1-5 Dimensional Drawing Models FC 8802 and 8812 1-5
Section 1 Introduction Flow Controllers for Gas and Liquid Service Figure 1-6 Dimensional Drawing Models FC 8902 and 8912 Figure 1-7 Dimensional Drawing Model FC 8842 1-6 Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Section 1 Introduction Flow Controllers for Gas and Liquid Service Figure 1-8 Dimensional Drawing Model FC 8942 Figure 1-9 Dimensional Drawing Model FC 8845 1-7
Section 1 Introduction Flow Controllers for Gas and Liquid Service Figure 1-10 Dimensional Drawing Model FC 8945 Figure 1-11 Dimensional Drawing Models FC 8805 and 8815 1-8 Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Section 1 Introduction Flow Controllers for Gas and Liquid Service Figure 1-12 Dimensional Drawing Models FC 8905 and 8915 Figure 1-13 Dimensional Drawing Model FC 8830 1-9
Section 1 Introduction Flow Controllers for Gas and Liquid Service Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Table 1-4 Model Code APPLICATION FCA87 Low flow gases and liquids with variable downstream pressure FCA88 Gases and liquids with variable upstream pressure FCA89 Gases and liquids with variable downstream pressure 00 02 05 12 15 30 40 42 45 44 TYPE OF USE General use, standard operating pressure, integral connection to Models 1350 & 1355 General use, stan
Section 1 Introduction Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Flow Controllers for Gas and Liquid Service Table 1-4 Model Code Cont’d VALVE CONFIGURATION Cartridge Valve, Low Flow Cartridge Valve, Med.
Section 1 Introduction Flow Controllers for Gas and Liquid Service Table 1-5 Sizing Chart 1-12 Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Section 2 Installation Flow Controllers for Gas and Liquid Service 2-1 General This section contains the procedures for the receipt and installation of the instrument. Do not attempt to start the system until the instrument has been permanently installed. It is extremely important that the start-up procedures be followed in the exact sequence presented.
Section 2 Installation Flow Controllers for Gas and Liquid Service Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 2-4 Return Shipment Prior to returning any instrument to the factory visit the Brooks website www.BrooksInstrument.com for a Return Materials Authorization Number (RMA#), or contact one of the following locations: Brooks Instrument 407 W. Vine Street P.O.
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Section 2 Installation Flow Controllers for Gas and Liquid Service 2-7 Installation The inlet and outlet connections are identified by the terms “in” and “out”. The controller may be installed in any attitude. Care must be exercised to prevent solids from entering the controller.
Section 2 Installation Flow Controllers for Gas and Liquid Service THIS PAGE WAS INTENTIONALLY LEFT BLANK 2-4 Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Section 3 Operation Flow Controllers for Gas and Liquid Service 3-1 Operating Precaution 3-2 General Series FC 8800: After the flow controller is installed and the downstream condition established, adjust the upstream pressure to the value required to pass the maximum flow rate desired with the integral valve 90% open.
Section 3 Operation Flow Controllers for Gas and Liquid Service THIS PAGE WAS INTENTIONALLY LEFT BLANK 3-2 Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Section 4 Maintenance Flow Controllers for Gas and Liquid Service 4-1 Maintenance The FC Series Flow Controllers require no maintenance when installed in a dirt-free flow line. Repair or disassembly of the regulator in the field is not recommended. The regulator parts are ultrasonically cleaned and whiteroom assembled for trouble free operation. Do not attempt to clean the regulator by flushing with solvent or air.
Section 4 Maintenance Flow Controllers for Gas and Liquid Service THIS PAGE WAS INTENTIONALLY LEFT BLANK 4-2 Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Section A - Essential Instructions Flow Controllers for Gas and Liquid Service Bulgarian Ɉɫɧɨɜɧɢ ɢɧɫɬɪɭɤɰɢɢ ɉɪɨɱɟɬɟɬɟ ɩɪɟɞɢ ɪɚɛɨɬɚ! Brooks Instrument ɩɪɨɟɤɬɢɪɚ, ɩɪɨɢɡɜɟɠɞɚ ɢ ɬɟɫɬɜɚ ɩɪɨɞɭɤɬɢɬɟ ɫɢ ɩɨ ɬɚɤɴɜ ɧɚɱɢɧ, ɱɟ ɬɟ ɞɚ ɨɬɝɨɜɚɪɹɬ ɧɚ ɦɧɨɝɨɛɪɨɣɧɢ ɧɚɰɢɨɧɚɥɧɢ ɢ ɦɟɠɞɭɧɚɪɨɞɧɢ ɫɬɚɧɞɚɪɬɢ.
Section A - Essential Instructions Installation and Operation Manual Flow Controllers for Gas and Liquid Service X-VA-FC-eng Part Number: 541B045AAG March, 2012 Czech Základní instrukce PĜed instalací si pĜeþtČte následující instrukce! Spoleþnost Brooks Instrument konstruuje, vyrábí a testuje tento produkt tak, aby splnil mnoho národních a mezinárodních standardĤ.
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Section A - Essential Instructions Flow Controllers for Gas and Liquid Service Dansk Grundlæggende vejledninger Læs disse før anvendelse! Brooks Instruments designer, fremstiller og afprøver sine produkter således, at de tilpasser sig både de indenrigs og internationale standarder. Disse udstyr bør installeres, bruges og repareres omhyggeligt, så at de kan virke tilsvarende deres normale anvendelsesperiode.
Section A - Essential Instructions Installation and Operation Manual Flow Controllers for Gas and Liquid Service X-VA-FC-eng Part Number: 541B045AAG March, 2012 Dutch Essentiële instructies Lees ze voordat u verder gaat! Brooks Instrument ontwerpt, produceert en test haar producten zodanig dat ze voldoen aan vele nationale en internationale normen. Deze producten moeten correct worden geïnstalleerd, bediend en onderhouden zodat ze binnen hun normale specificaties blijven werken.
Section A - Essential Instructions Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Flow Controllers for Gas and Liquid Service Estonian Olulised juhised Enne kasutamist lugege hoolikalt läbi! Brooks Instrument konstrueerib, valmistab ja katsetab oma tooteid selliselt, et need vastaksid paljude erinevate riiklike ja rahvusvaheliste standardite nõuetele.
Section A - Essential Instructions Installation and Operation Manual Flow Controllers for Gas and Liquid Service X-VA-FC-eng Part Number: 541B045AAG March, 2012 Finnish Perusohjeet Lue ensin ohjeet huolellisesti! Brooks Instrument suunnittelee, valmistaa ja testaa laitteensa vastaamaan useimpien kotimaisten ja kansainvälisten standardien vaatimuksia. Tuotteet tulee asentaa, käyttää ja huoltaa käyttöohjeiden mukaan jotta niiden toimivuus taataan.
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Section A - Essential Instructions Flow Controllers for Gas and Liquid Service French Instructions essentielles A lire avant de commencer ! Brooks Instrument conçoit, fabrique et teste ses produits pour répondre à de nombreuses normes nationales et internationales. Ces produits doivent être correctement installés, utilisés et entretenus pour pouvoir fonctionner dans le cadre de leurs spécifications normales.
Section A - Essential Instructions Installation and Operation Manual Flow Controllers for Gas and Liquid Service X-VA-FC-eng Part Number: 541B045AAG March, 2012 German Wichtige Anweisungen Bitte zuerst lesen! Brooks Instrument entwickelt, produziert und testet seine Produkte derart, dass sie viele nationale und internationale Standards erfüllen. Nur bei korrektem Einbau sowie richtiger Bedienung und Wartung dieser Produkte ist ein Betrieb unter Einhaltung der Standardvorgaben sichergestellt.
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Section A - Essential Instructions Flow Controllers for Gas and Liquid Service Greek ǺĮıȚțȑȢ ȠįȘȖȓİȢ ǻȚĮȕȐıIJİ ʌȡȚȞ ıȣȞİȤȓıİIJİ! Ǿ Brooks Instrument ıȤİįȚȐȗİȚ, ʌĮȡȐȖİȚ țĮȚ įȠțȚȝȐȗİȚ IJĮ ʌȡȠȧȩȞIJĮ IJȘȢ ıİ ıȣȝȝȩȡijȦıȘ ȝİ ʌȜȒșȠȢ İșȞȚțȫȞ țĮȚ įȚİșȞȫȞ ʌȡȠIJȪʌȦȞ. Ǿ ıȦıIJȒ İȖțĮIJȐıIJĮıȘ, ȤȡȒıȘ țĮȚ ıȣȞIJȒȡȘıȒ IJȠȣȢ ĮʌȠIJİȜİȓ ĮʌĮȡĮȓIJȘIJȘ ʌȡȠȨʌȩșİıȘ IJȘȢ ȜİȚIJȠȣȡȖȓĮȢ İȞIJȩȢ IJȦȞ țĮȞȠȞȚțȫȞ ȠȡȓȦȞ.
Section A - Essential Instructions Installation and Operation Manual Flow Controllers for Gas and Liquid Service X-VA-FC-eng Part Number: 541B045AAG March, 2012 Hungarian AlapvetĘ utasítások ElĘször olvassa el ezeket! A Brooks Instrument olyan módon tervezi, gyártja és teszteli termékeit, hogy azok megfeleljenek számos belföldi és nemzetközi szabványnak.
Section A - Essential Instructions Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Flow Controllers for Gas and Liquid Service Italian Istruzioni fondamentali Leggerle subito! La Brooks Instrument progetta, fabbrica e collauda i propri prodotti in maniera tale che siano conformi ai vari standard nazionali ed internazionali.
Section A - Essential Instructions Installation and Operation Manual Flow Controllers for Gas and Liquid Service X-VA-FC-eng Part Number: 541B045AAG March, 2012 Latvian SvarƯga instrukcija Pirms turpinƗt izlasiet! „Brooks Instrument” projektƝ, ražo un pƗrbauda savus ražojumus atbilstoši daudziem nacionƗlajiem un starptautiskajiem standartiem. Lai nodrošinƗtu šo izstrƗdƗjumu turpmƗku darbƯbu atbilstoši noteiktajiem parametriem, tie ir pareizi jƗuzstƗda, jƗlieto un jƗapkopj.
Section A - Essential Instructions Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Flow Controllers for Gas and Liquid Service Lithuanian Pagrindinơs instrukcijos Perskaitykite prieš tĊsdami! „Brooks Instrument“ projektuoja, gamina ir išbando savo gaminius, kad jie atitiktǐ Ƴvairius nacionalinius ir tarptautinius standartus. Šie gaminiai turi bnjti tinkamai montuojami, eksploatuojami ir prižinjrimi, kad ir toliau veiktǐ pagal jiems bnjdingus techninius parametrus.
Section A - Essential Instructions Installation and Operation Manual Flow Controllers for Gas and Liquid Service X-VA-FC-eng Part Number: 541B045AAG March, 2012 Polish Zalecenia wstĊpne Prosimy przeczytaü przed rozpoczĊciem uĪytkowania! Brooks Instrument projektuje, wytwarza i testuje swoje produkty tak, aby speániaáy wymagania licznych norm krajowych i miĊdzynarodowych.
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Section A - Essential Instructions Flow Controllers for Gas and Liquid Service Portuguese Instruções Básicas Antes de proceder, leia-as! A Brooks Instrument projecta, fabrica e testa os seus produtos de forma a que os mesmos satisfaçam numerosas normas nacionais e internacionais. Os equipamentos devem ser instalados, explorados e mantidos de maneira adequada, e devem funcionar de acordo com a sua gama de utilização.
Section A - Essential Instructions Installation and Operation Manual Flow Controllers for Gas and Liquid Service X-VA-FC-eng Part Number: 541B045AAG March, 2012 Romanian IndicaĠii de referinĠă CitiĠi-le întâi pe acestea! Brooks Instrument îúi proiectează, produce úi testează produsele într-un mod ce respectă un mare număr de standarde autohtone úi internaĠionale.
Section A - Essential Instructions Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Flow Controllers for Gas and Liquid Service Slovak Základné príkazy PreþítaĢ pred inštaláciou! Brooks Instrument svoje výrobky projektuje, vyrába a testuje takým spôsobom, aby tieto vyhoveli domácim aj medzinárodným normám.
Section A - Essential Instructions Installation and Operation Manual Flow Controllers for Gas and Liquid Service X-VA-FC-eng Part Number: 541B045AAG March, 2012 Slovene Osnovna navodila Najprej preberite jih Brooks Instrument tako konstruira, izdeluje in terstira svoje izdelke, da oni ustrezajo številnim domaþim in mednarodnim standardom. Te naprave se morajo ustrezno instalirati, koristiti in vzdrževati, da vsekakor delajo ustrezno normalnom podroþju funkcioniranja.
Section A - Essential Instructions Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Flow Controllers for Gas and Liquid Service Spanish Instrucciones básicas ¡Léalos primero! El Brooks Instrument proyecta, fabrica y prueba sus productos de manera que éstos respondan a numerosas normas nacionales e internacionales.
Section A - Essential Instructions Installation and Operation Manual Flow Controllers for Gas and Liquid Service X-VA-FC-eng Part Number: 541B045AAG March, 2012 Swedish Väsentliga anvisningar. Läs detta innan du fortsätter ! Brooks Instrument konstruerar, tillverkar och testar sina produkter med syfte att uppfylla alla nationella och internationella standarder.
Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 Flow Controllers for Gas and Liquid Service THIS PAGE WAS INTENTIONALLY LEFT BLANK
Flow Controllers for Gas and Liquid Service Installation and Operation Manual X-VA-FC-eng Part Number: 541B045AAG March, 2012 LIMITED WARRANTY Seller warrants that the Goods manufactured by Seller will be free from defects in materials or workmanship under normal use and service and that the Software will execute the programming instructions provided by Seller until the expiration of the earlier of twelve (12) months from the date of initial installation or eighteen (18) months from the date of shipment b