Owner manual

p.2
They are not, however, a substitute for determining your own internal safety
procedures.
CAUTION
!!
Use of controls, adjustments, or procedures other than those specified in this
manual without consulting a competent safety professional may result in exposure
to potential hazards. Always follow established industrial safety practices when
operating production equipment.
1.5.1 Unsafe acts
• NEVER defeat a safety interlock unless you are certified to perform the
procedure and have been specifically directed to defeat the interlock.
• NEVER operate or service this system without a thorough knowledge of the
dangers involved and the precautions to be followed for safe and efficient
operation.
• NEVER disregard instructions to lockout/tagout the system.
• NEVER permit unauthorized or untrained personnel to use the system.
• NEVER STAND IN WATER OR ON A WET SURFACE WHILE OPERATING
ANY ELECTRICALLY POWERED EQUIPMENT.
• NEVER place your hands near moving parts or energized parts or
subsystems. Components can move rapidly.
• NEVER remove a warning label from the equipment.
• NEVER operate damaged equipment.
• NEVER permit unauthorized or untrained personnel access to the system.
1.5.2 Recommended practices
• USE THE BUDDY SYSTEM: ALWAYS perform maintenance procedures in
teams of two or more people; one to monitor the controls and indicators, and
one to watch the system operation.
• ALWAYS observe all warning labels.
• ALWAYS avoid all unsafe acts.
CAUTION
!!
Use of controls, adjustments, or procedures other than those specified in this
manual without consulting a competent safety professional may result in exposure
to potential hazards
CAUTION
!!
The safety procedures described in this manual are minimum guidelines. It is
believed that these guidelines will provide an acceptable level of safety. These
guidelines, however, should not be considered a substitute for determining your
own internal safety procedures in consultation with a competent safety
professional.
1.0
_INTRODUCTION