Assembly instructions

Page: 1 /2

MRWH

Rolling Stand With 12 Pivot Hangers

Assembly Instructions

PARTS LIST

Part Description Qty

Non-locking

caster

assembly

M4X60 bolt 2

Washer 2

Spreader

assembly

Side frame

assembly

M6X8 set

screw

Upper frame

assembly

Tube caps 2

Spring 12

Hanger 12

Lower frame

assembly

Locking

caster

assembly

Allen key 1

PAGE 1
MRWH Rolling Stand With 12 Pivot Hangers Assembly Instructions PARTS LIST Part Page: 1 /2 Description Qty 1 Non-locking caster assembly 2 2 M4X60 bolt 2 3 Washer 2 4 Spreader assembly 1 5 Side frame assembly 2 6 M6X8 set screw 4 7 Upper frame assembly 1 8 Tube caps 2 9 Spring 12 10 Hanger 12 11 Lower frame assembly 1 12 Locking caster assembly 2 13 Allen key 1
PAGE 2
MRWH Rolling Stand With 12 Pivot Hangers Assembly Instructions 5) Install locking casters (part 12) into lower frame assembly and non- 1) Slide lower frame assembly (part 11) into both side frame assemblies (part 5). Insert two set screws (part 6) into lower frame assembly but do not tighten. locking casters (part 1) into side frame assemblies.