Assembly instructions

Mobile Plan Center
1) Insert upper tube assembly(1)into lower tube assembly(3)
〖Tube of upper tube assembly (1) is smaller than lower tube assembly (3)〗.
2) Insert lower end tube assembly (4)into lower tube assembly (3)
〖Tube of lower end tube assembly (4) is bigger than upper end tube assembly (2)〗
3) Insert upper end tube assembly (2)into upper tube assembly(1)
4) Install locking casters (5)and non-locking casters(6)into lower end tube assembly (4)
5) Install set screws (7)into upper(1)and lower(3)tube assemblies and adjust for height and depth.
Item Description Qty
1 Upper tube assembly 2
2 Upper end tube assembly 2
3 Lower tube assembly 2
4 Lower end tube assembly 2
5 Locking caster 2
6 Non-locking caster 2
7 M6X8 set screw 10
8 Allen key 1