User Guide

Page: 1 / 2

MVPC

Mobile Plan Center

Assembly Instructions

PARTS LIST

Part Description Qty

Upper

tube

assembly

Lower

end tube

assembly

Locking

caster

Upper

end tube

assembly

M6X8

set screw

Tube

caps

Non-locking

caster

Lower

tube

assembly

Allen key 1

PAGE 1
MVPC Mobile Plan Center Assembly Instructions PARTS LIST Part 1 2 3 4 Description Qty Upper tube assembly Upper end tube assembly Tube caps Lower tube assembly Part Description Qty 5 Lower end tube assembly 2 6 Locking caster 2 7 M6X8 set screw 10 8 Non-locking caster 2 9 Allen key 1 2 2 8 2 Page: 1 / 2
PAGE 2
MVPC Mobile Plan Center Assembly Instructions 1) Insert lower end tube assemblies (part 5) with caster weld nuts facing down into lower tube assemblies (part 4). Adjust to size of clamp being used and insert four pcs M6X8 set screw (part 7) into lower tube assembly and tighten with allen key (part 9). 3) Insert upper end tube assemblies (part 2) into upper tube assemblies (part 1). Insert four pcs set screws (part 7) into upper tube assembly (part 1).