SMART DOOR/WINDOW SENSOR USER MANUAL FCC ID: Z52NAS-DS01W0
FCC Statement: 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
SPECIFICATIONS Model: BKSSDW Battery: CR2-3V x 1 Standby current: 13uA Working current: 115mA-120mA Standby time: 5 Years Working time: 1 year (7 times/day); 2 years (3 times/day) Wi-Fi Standard: 2.4GHz 802.
FEATURES • Wi-Fi connected • Sends alerts whenever door/window is opened/closed • Long battery life
WARRANTY INFORMATION One Year Limited Warranty. Customer Service Number: 732-994-2301 The BROOKSTONE trademark. names and logos are owned by BKST Brand Holdings LLC ©2019. All rights reserved Manufactured, marketed and distributed by Smartpoint LLC, under license Google and Google Play are trademarks of Google LLC. App Store® is a registered trademark of Apple, Inc All trademarks and registered trademarks are property of their respective owners.
PRODUCT CONFIGURATION LED Light Door sensor small body Door sensor main body Disassemble button Reset button Stickers Battery Anchor Screw Reset process: (1) Press the reset button for 6 seconds, then release, the indicator light will flash rapidly. The device will then be in smart wifi mode. (2) Press the reset button again for 6 seconds, then release, the indicator light will flash slowly. The device will then be in AP mode.
DEVICE MODES Status of LED Light Definition Indicator LED light flashes quickly Wi-Fi Connect Mode Indicator LED light flashes slowly Indicator LED light flashes for a few seconds (When sensor is ready to connect to Wi-Fi) AP mode (Connects phone’s Wi-Fi to sensor’s hotspot) Triggered mode (When the sensor detects opening of door/window) Stand by mode Indicator LED light is off (Sensor is waiting to detect opening of door/window)
DOWNLOAD APP 1. Android: download “Brookstone Smart” app on GooglePlay. 2. iPhone: download “Brookstone Smart” app from the App Store.
REGISTRATION AND LOGIN 1. Run the “Brookstone Smart” app from your smart phone. 2. Register and login.
PLACEMENT OF DEVICE Place main body on one side of the opening and the small body on the other side(please see images below). Use the enclosed stickers or screws to mount the sensors.
ADD DEVICE 1. Press the disassemble button(use a car key or something else hard to push in). Once cover is removed pull the tab from between the battery and the metal connector. If the light is already blinking rapidly, begin the set up process. If not, then press and hold the reset button for 6 seconds, until the indicator light blinks rapidly. The device is now ready to link to your account via the Brookstone Smart app.
2. Make sure phone is connected to your Wi-Fi network and that it is a 2.4GHz network. 3. Press the (+) symbol in the top right corner of the app and select the Door/Window Sensor from the list of devices to add.
NETWORK CONFIGURATION 4. Confirm indicator light is blinking and press the “confirm indicator rapidly blinks” button to connect in Smart WiFi Mode. 5. Make sure phone is connected to the Wi-Fi network that the device will be connected to. Enter your password for the Wi-Fi network.
6. Connecting process will begin. Do not turn off Smart Door/Window Sensor or phone while connecting. Wait for connection process to complete. 7. Once device has been successfully added, name the device what you would like it to be called in the app. The Smart Door/Window Sensor is ready for use.
8. Notice: Only follow steps 8-11 if connecting in AP mode. From the smart wifi connect page click on “AP Mode” in the top right corner. 9. When light is blinking rapidly hold reset button for 6 seconds and the light should now blink slowly. Click on the “confirm indicator slowly blinks” button.
10. Make sure phone is connected to the Wi-Fi network that the device will be connected to. Enter your password for the Wi-Fi network. 11. Follow the on screen instructions. Connecting process will begin. Do not turn off Door/Window Sensor or phone while connecting. Wait for connection process to complete.
MAIN FUNCTIONS 1. The Smart Door/Window Sensor will detect when the door/window is opened/closed. It will send an alert 3-5 seconds after sensor is triggered. 2. To view alarm recording history click the “HISTORY” button. 3. To turn off/on push notifications click the “NOTICE” button. From here you are able to turn on/off notifications for open/close and low battery.
4. To connect two devices via scene click on “Smart” button on the bottom center of the home screen. Then click the (+) symbol at the top right of the screen. 5. Now you can have certain devices carry out actions based on notifications of other devices.
DEVICE SHARING 1. You can allow others in your family to have access to the Smart Door/Window Sensor to receive alerts. 2. Click on the “me” button at the bottom right of the home screen. They click on your family at the top. (If you changed the name of your family in the app it will appear as what you changed it to here).
3. Click on “Add Member”. 4. On this screen fill out the information of the family member you would like to give access to. Make sure to use the phone number or email that your family member set up their Brookstone Smart account with.
PUSH NOTIFICATIONS 1. You can turn on/off notifications for all devices connected to app by clicking on the “Me” button at the bottom right of the screen. 2. Then click on ”Settings” button. From there you can turn on/off all notifications.
REMOVE A DEVICE 1. From the home screen, click on the device you would like to remove. 2. Then click on the edit symbol on the top right of the screen. 3. From there you would then click the “Remove Device” button at the bottom of the screen.