Bluetooth® Tablet Station FOLDS FOR MORE COUNTER SPACE
Table of contents Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Location of Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . .
CAUTION • T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE. • T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
DANGER To reduce the risk of electric shock, burns, fire or injury: 1. Do not use while bathing or in a shower. 2. Do not place or store unit where it can fall or be pulled into a tub or sink. 3. Do not place in, drop or submerge in water or other liquid. 4. Do not reach for unit that has fallen into water. Unplug it immediately. 5. C are should be taken so that objects do not fall and liquids are not spilled onto the unit. WARNING 1.
7. T he unit should be situated away from direct sunlight or heat sources such as radiators, electric heaters, heat registers, stoves, or other units (including amplifiers) that produce heat. Avoid placing on top of equipment that radiates heat. 8. N ever block the air openings of the unit with materials such as clothing, plastic bags or papers, or place it on a soft surface such as a bed or couch, where the air openings may be blocked. 9. Do not overload electrical outlet.
Battery precautions • Dispose of this unit properly. Do not dispose of the old unit in a fire. • T he battery inside the unit may explode if mistreated. Do not attempt to disassemble the unit's battery. • Dispose of this unit as you would a battery.
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Location of parts and controls 1. USB Charging Port (2) 6. Bluetooth® Keyboard 2. DC-in 7. Tablet Shelf 8. Keyboard Tabs 3. Rubber Feet 4. Micro USB Input 5.
Location of parts and controls (top view) 1. Tablet Shelf 4. Keyboard 2. Keyboard Tabs 5. On/Off Switch 3. Control Panel 6.
Location of parts and controls (Control panel) Bluetooth® Connect Button Caps Lock LED Bluetooth® LED 9 On/Off Switch Charging Outlet Power LED Charging LED
Using the Stand 1. The Tablet Stand folds for easy storage and the keyboard is removable. 2. T o use the Tablet Stand, simply pull the keyboard down from its storage position and set your device on its shelf. You may remove the keyboard from the Tablet Stand’s base to use, too. 3. Y ou may use the USB ports on the Tablet Stand to charge the keyboard, your device, or both! Simply use the included adapter cords to connect. See below for steps. 4.
Charging your device 1. Connect the Adapter to the Adapter Port on the stand and then to an electrical outlet. 2. P lug your device’s USB charging cord (supplied with your device) into the USB Charging Port on the stand, and then into your device, to charge. Syncing the keyboard 1. Power on your device. 2. S lide the On/Off switch on the Keyboard to “on”. Both the Bluetooth LED and the power LED illuminators will light up for a few seconds and then shut off. 3.
11. I f your device goes into standby mode, the Tablet Stand should still be synced. If you power-off your device you may need to re-sync. If you use the Tablet Stand with a new device, or it doesn’t connect properly, follow the steps above to re-sync. Note: The Tablet Stand Keyboard will automatically go into standby mode after 15 minutes of non-use in order to preserve battery life. Just press any key to reactivate the keyboard.
Specifications Bluetooth® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3.0 Bluetooth® Working Distance . . . . . . . . . . . . . . . . . . 32' USB Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5VDC - 10W max. Charging Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 - 3 hrs. Battery Usage Time . . . . . .
Troubleshooting Issue Solution The keyboard will not work with my device. Make sure that the keyboard is synced correctly. Power the keyboard off and then on and try again. If your device has been upgraded, or you are using a different device, resync using the steps on the previous pages. Check the battery power. You may need to recharge the Tablet Stand. Make sure that both your device and the Tablet Stand are on and in good working order.
NOTES: 15
NOTES: 16
One (1) Year Limited Warranty Brookstone® warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”).
suppliers other than Brookstone may provide their own warranties to the purchaser, but Brookstone, in so far as permitted by law, provides these products “as is.
Find thousands more great ideas online 802507 Merrimack, New Hampshire USA 03054 • 800-846-3000 • Brookstone.
