MAX®2 Cordless Powerful percussion massage
Table of contents Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Location of Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Massager Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CAUTION • T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE. • T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
DANGER To reduce the risk of electric shock, burns, fire or injury: 1. A lways unplug the product from the electrical outlet immediately after using and before cleaning. 2. Do not use while bathing or in a shower. 3. D o not place or store product where it can fall or be pulled into a tub or sink. 4. Do not place in or drop into water or other liquid. 5. Do not reach for product that has fallen into water. Unplug it immediately.
4. Keep cord away from heated surfaces. 5. N ever block the air openings of the product or place it on a surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint and hair. 6. Never use while sleeping. 7. Never drop or insert objects into any openings. 8. D o not operate where aerosol products are being used or where oxygen is being administered. 9. Do not use on or near eyes or other highly sensitive areas. 10.
CAUTION 1. Consult your doctor before using this product. 2. Individuals with pacemakers should not use this product. 3. N ever leave the product operating or unattended, especially if children are present. 4. Never use the product on open skin eruptions, swollen or inflamed areas. 5. D o not operate after taking pain killers, sedatives or alcohol. Consult your doctor if you are under these medications. 6. D o not operate for more than 20 minutes continuously.
Location of parts and controls 8 1. Adapter Jack 2. Handle 1 3. On/Off Button 4. Speed Button 7 5. Speed/Charging LEDs 6 5 6. Programs Button 7. Programs LEDs 4 8. Handle 2 3 9. Massaging Nodes (2) 10.
Massager OPERATION Charging the Massager Important! Fully charge the massager for 2 hours before first use. 1. T o charge the massager, connect the Adapter to the massager and plug it into a wall outlet. 2. T he one through five SPEED LEDs will illuminate sequentially while charging, and they will all remain illuminated when charging is complete. 3. A completely depleted massager battery will take up to 2 hours to charge. 4. The average run-time for the battery at the highest setting is 3 hours. 5.
Using SPEED Because the massager runs at Speed 5 when it is first powered on, SPEED must be pressed to change speeds. • P ress SPEED once and the motor turns to the minimum, Speed 1. One green speed-indicating LED lamp lights up. • P ress SPEED again and the motor turns to Speed 2. Speed 1 and Speed 2 green LED lamps light up. • P ress SPEED again and the motor turns to Speed 3. Speed 1, Speed 2 and Speed 3 green LED lamps light up. • P ress SPEED again and the motor turns to Speed 4.
Using PROGRAMS • P ress the PROGRAMS button once and PULSING is activated. The corresponding blue LED lamp lights up. The motor continuously runs in sequence of Speed 5 and a brief stop. The corresponding Speed 5 green lamp lights up. • P ress the PROGRAMS button again and ENERGIZING is activated. The corresponding blue LED lamp lights up. The motor continuously runs in sequence of Speed 1, Speed 2, Speed 3, Speed 4; Speed 1, Speed 2, Speed 3, Speed 4 and so on.
PRODUCT CARE AND MAINTENANCE 1. Place the massager in a safe, cool and dry place when not in use. 2. Store the Adapter with the massager. 3. Wipe massager with a soft, damp cloth using no abrasive cleaner. 4. Never submerge the unit in any liquid. 5. Keep away from all solvents and harsh detergents. 6. DO NOT attempt to repair this massager. There are no user-serviceable parts. 7. D ispose of this product as you would a battery. Contact your local recycling center for disposal rules.
SPECIFICATIONS 11 Adapter Input Output 100-240 ~ 50/60Hz 1.5A 15VDC, 3.
Notes 12
One (1) Year Limited Warranty Brookstone warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”).
suppliers other than Brookstone may provide their own warranties to the purchaser, but Brookstone, in so far as permitted by law, provides these products “as is.
Find thousands more great ideas online 792451 Merrimack, New Hampshire USA 03054 • 800-846-3000 • Brookstone.
