grill gauge propane gas monitor
grill gauge propane gas monitor better by brookstone® We believe that exacting standards are the core of our success. This product has been thoroughly tested to be certain it meets our rigorous quality control criteria. Our Grill Gauge propane monitor lets you know when to grill— and when to refill! No more empty propane tanks during family cookouts or when your propane supplier is closed. You’re sure to be prepared for all grilling occasions with the Brookstone® Grill Gauge.
danger OCK Failure to follow these instructions may result in an explosion or fire that may cause property damage, serious injury or death. Your Grill Gauge is equipped with a backcheck module that prevents propane from flowing until connected to your appliance. Do not insert foreign objects into the adapter to push open the backcheck module. You could be sprayed with propane and/or cause personal injury, a fire or explosion.
for your safety READ ALL INSTRUCTIONS PRIOR TO INSTALLATION AND USE OF YOUR NEW GRILL GAUGE. If you smell propane: 1. Shut-off burner control. 2. Extinguish any open flames. 3. Open grill lid. 4. Shut-off propane supply at cylinder. 5. If odor continues, immediately contact your gas supplier or fire department. 6. Connection or disconnection of the propane cylinder must take place outdoors in a well ventillated area only. 7. Do not make modifications to the Grill Gauge.
location of parts 1 Figure 1 2 4 3
location of parts 1. Large Outside Threads 2. Grill Gauge Window with 3 Temperature Indicators 3. Plastic Coupling Nut Grill Gauge Temperature Indicators (see Figure 1) Propane gas can be used at very low temperatures. The Grill Gauge makes allowances for the outside air temperature by having 3 sectors labeled Hot Day, Cool Day, and Cold Day. Read the Grill Gauge according to the air temperature where you are using the appliance.
installation instructions 1. Turn gas grill burner control knob OFF, turn propane supply OFF at cylinder. 2. Move gas grill to an open, well-ventilated outdoor area prior to disconnecting/connecting to outlet of propane cylinder service valve. 3. Make sure all connections are clean. Adjust gauge to desired position. Hand tighten the plastic coupling nut clockwise to the large outside threads on the propane cylinder service valve until the connection seals properly. (see Figure 2) 4.
installation instructions (cont.) NOTE: In the connection process, the connections will seal on the internal backcheck modules in the cylinder valve and Grill Gauge resulting in a slight resistance. The connection requires about a one-half to three-quarters additional turn to complete the connection. TIGHTEN BY HAND ONLY—TAKING CARE NOT TO CROSSTHREAD THE CONNECTION. DO NOT USE TOOLS.
operating instructions Before lighting and using your appliance, check all connections for leaks using a mild soapy water solution. DO NOT USE MATCHES! Testing for leaks should start at the gas cylinder working back to your appliance. Leak Test Procedure 1. Turn OFF the propane supply at the cylinder. Turn OFF all appliance burner controls. 2. With the appliance controls in the OFF position, turn propane cylinder valve ON. This pressurizes all lines to appliance(s). Wait 3 seconds then CLOSE cylinder valve.
operating instructions (cont.) 3. When propane system is pressurized, apply a 50/50 solution of soap and water with a soft bristled brush to all connections and look for bubbles. An expanding bubble or bubbles indicate you have a leak. Repair all leaks prior to using propane cylinder or appliances. Retighten where bubbles appear, recheck for leakage using the soap and water solution. If bubbles indicate you still have a leak - STOP - DO NOT USE the propane cylinder or appliance(s).
operating instructions (cont.) Operating as a refill Indicator Appliance(s) must be in operation from 5 to 15 minutes for an accurate propane supply reading. The Grill Gauge is specifically designed to give you an indication of your propane usage. Based on specific appliances usage at one time, the Grill Gauge will read as follows: GREEN ZONE.............................Gas supply is adequate for rate of consumption YELLOW ZONE.........................
Made in Germany and Italy US Patent No: 4450721 & 5780711 Canadian Patent No: 1154611 & 2187155 Mexican Patent No: 150345 German Patent No: 19581608 UK Patent No: 2301895 LISTED ADAPTER FOR LP-GAS 46M5 11
One (1) Year Limited Warranty Brookstone warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”).
This warranty does not apply to: a) damage caused by failure to follow instructions relating to product’s use or the installation of components; b) damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage caused by service performed by anyone who is not a representative of Brookstone; d) accessories used in conjunction with a covered product; e) a product or part that has been modified to alter functionality or capability; f) items intended to be periodically re
B e t t e r b y B r o o k s t o n e ® W e c r e a t e p r o duc t s to ma k e lif e better. Th r o ugh i n n o va t iv e d e s ig n , b e s t - i n - cla s s p r o duc t s e l e c t i o n a n d a n u n y i e ldi n g c o mmi t m e n t t o e x c e ll e n c e , w e ma x imi z e t h e q uali t y o f o u r p r o duc t s — a n d h e lp y o u e n ha n c e t h e q uali t y o f y o u r lif e . Merrimack, New Hampshire 03054 • Customer Service 800-846-3000 • www.Brookstone.
