user manual

will illuminate solid blue for 5 seconds
and then turn off.
3. To put the speaker into pairing
mode, press and hold the
PAIRING BUTTON until the LED
RING starts flashing. The
speaker will wait for a connection
in pairing mode for two minutes.
4. Once the speaker is in pairing
mode and your device is ready to
pair, select “Big Blue Go" on your
device. If prompted, use 0000 as a
PIN for the pairing code. Once the
speaker is selected, the LED
RING will change to solid blue
and a tone will sound to confirm
pairing is complete.
Note: After the initial pairing of
your device, the speaker should
automatically pair with your device
the next time you power the speaker
on. Depending upon your device, you
may have to select “Big Blue Go” in
your device's Bluetooth menu.
CARE AND STORAGE
Warning: this product contains a
lithium-ion battery. To prevent injury,
remove the unit from the vehicle when
exiting or store it out of direct sunlight.
Clean the speaker with a soft, dry
cloth.
COMPATIBILITY
Bluetooth® 2.0 or above device with
A2DP/AVRCP/HFP/HSP.
PHONE OPERATION
1. When a call is received, a tone
sounds, the name of the caller is
announced (if the caller's number
is in the contacts of the phone
paired with the speaker), and
the voice prompt asks for the
"Answer" or "Ignore" command.
2. To answer the call, say "Answer"
or press the CALL ANSWER
BUTTON .
3. To ignore the call, say "Ignore" or
press the CALL REJECT
BUTTON .
4. To switch a call from the
speaker to the phone for a
private conversation, press the
CALL ANSWER BUTTON
twice.
5. To switch a call from the phone
back to the speaker, press the
CALL ANSWER BUTTON
twice.
6. To end an active call, press the
CALL END BUTTON .
7. Press the VOLUME UP BUTTON
to increase the call volume.
8. Press the VOLUME DOWN
BUTTON to decrease the call
volume.
SLEEP MODE
If the speaker has not been
connected to a device for 30
minutes, it will enter sleep mode
to preserve battery life. Press any
button to exit sleep mode. A tone
will sound and the LED RING will
illuminate solid blue for 5 seconds.
USING THE SUCTION MOUNT
1. Push the LOCK LEVER up to
unlock the SUCTION CUP.
2. Firmly press the SUCTION CUP
onto your vehicle's windshield
and push the LOCK LEVER down
to secure the SUCTION CUP.
3. Place the LOCK NUT over
the BALL JOINT and snap the
BRACKET onto the BALL
JOINT. Secure by tightening the
LOCK NUT onto the BRACKET.
4. Snap the speaker securely into
the BRACKET.
LISTENING TO AUDIO
1. Press the TRACK FORWARD
BUTTON to go to the next
track. Press and hold the
TRACK FORWARD BUTTON
to forward within a track.
2. Press the TRACK BACK
BUTTON to go to the
previous track. Press and hold
the TRACK BACK BUTTON
to move backward within a track.
3. To pause audio, press the PLAY/
PAUSE BUTTON. To resume
audio, press the PLAY/PAUSE
BUTTON.
4. Press the VOLUME UP BUTTON
to increase audio volume.
5. Press the VOLUME DOWN
BUTTON to decrease audio
volume.
Note: Incoming phone calls take
priority over audio. If a call is
received while audio is playing, the
audio will pause. After the call is
ended or ignored, the audio will
resume play.
BATTERY LEVEL
To hear the speaker's battery level,
slide the POWER SWITCH to .
The battery life level is announced.
Bracket
Lock Nut
Ball Joint
Suction Cup
Lock Lever
TROUBLESHOOTING
NO POWER
• Make sure the speaker is charged.
SOUND IS NOT CLEAR OR
THERE IS NO SOUND
• Power the speaker off and then
back on.
• Adjust your device’s equalizer.
• Check the speaker's or your
device’s volume level.
• Confirm device is paired to the
speaker.
• Confirm device is in connection
range to the speaker.
PHONE CALL IS NOT
ANSWERED BY SPEAKER
• Confirm device is paired to the
speaker.
• Make sure your cellphone has HFP.
• Restart the speaker to auto-
connect with your Bluetooth
®
device.
AUDIO DOES NOT PLAY AFTER
ENDING A CALL
• Press the PLAY/PAUSE
ONE (1) YEAR LIMITED WARRANTY
Brookstone
®
warrants this product against
defects in materials and/or workmanship under
normal use for a period of ONE (1) YEAR from
the date of purchase by the original purchaser
(“Warranty Period”). If a defect arises and a
valid claim is received within the Warranty
Period, at its option, Brookstone will either
1) repair the defect at no charge, using
new or refurbished replacement parts, or
2) replace the product with a new product that
is at least functionally equivalent to the original
product, or 3) provide a store credit in the
amount of the purchase price of the original
product. A replacement product or part, including
a user-installable part installed in accordance with
instructions provided by Brookstone, assumes
the remaining warranty of the original product.
When a product or part is exchanged, any
replacement item becomes your property and the
replaced item becomes Brookstone’s property.
When a store credit is given, the original product
must be returned to Brookstone and becomes
Brookstone’s property.
Obtaining Service: To obtain warranty service,
call Brookstone Limited Warranty Service at
1-800-292-9819. Please be prepared to
describe the product that needs service and
the nature of the problem. A purchase receipt
is required. All repairs and replacements must
be authorized in advance. Service options, parts
availability and response times will vary. You are
responsible for delivery and the cost of delivery of
the product or any parts to the authorized service
center for replacement, per our instructions.
Limits and Exclusions: Coverage under this
Limited Warranty is limited to the United States of
America, including the District of Columbia and the
U.S. Territories of Guam, Puerto Rico, and the U.S.
Virgin Islands. This Limited Warranty applies only
to products manufactured for Brookstone that can
be identified by the “Brookstone” trademark, trade
name, or logo affixed to them or their packaging.
The Limited Warranty does not apply to any non-
Brookstone products. Manufacturers or suppliers
other than Brookstone may provide their own
warranties to the purchaser, but Brookstone,
in so far as permitted by law, provides these
products “as is.” This warranty does not apply to:
a) damage caused by failure to follow instructions
relating to product’s use or the installation of
components; b) damage caused by accident,
abuse, misuse, fire, floods, earthquake or other
external causes; c) damage caused by service
performed by anyone who is not a representative
of Brookstone; d) accessories used in conjunction
with a covered product; e) a product or part
that has been modified to alter functionality or
capability; f) items intended to be periodically
replaced by the purchaser during the normal
life of the product including, without limitation,
batteries or light bulbs; g) any product sold
“as is” including, without limitation, floor
demonstration models and refurbished items;
or h) a product that is used commercially or for a
commercial purpose.
BROOKSTONE SHALL NOT BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE
OF THIS PRODUCT, OR ARISING OUT OF
ANY BREACH OF THIS WARRANTY. TO THE
EXTENT PERMITTED BY APPLICABLE LAW,
BROOKSTONE DISCLAIMS ANY AND ALL
STATUTORY OR IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE
AND WARRANTIES AGAINST HIDDEN
OR LATENT DEFECTS. IF BROOKSTONE
CANNOT LAWFULLY DISCLAIM STATUTORY
OR IMPLIED WARRANTIES, THEN TO THE
EXTENT PERMITTED BY LAW, ALL SUCH
WARRANTIES SHALL BE LIMITED IN
DURATION TO THE DURATION OF THIS
EXPRESS WARRANTY.
Some states disallow the exclusion or limitation of
incidental or consequential damages or how long
an implied warranty lasts, so the above exclusions
or limitations may not apply to you. This warranty
gives you specific legal rights and you may also
have other rights, which vary from state to state.
BUTTON to resume audio.
SPEAKER DOES NOT CONTROL
DEVICE AUDIO FUNCTIONS
• Make sure your Bluetooth
®
device
has AVRCP.
SPECIFICATIONS
Power Supply:
AC 100-240V~50/60Hz,
DC 5V 700mA
Battery Type: Li-Ion,1150 mAH
Range: Up to 33 ft
Charging Time: Approx. 3 hours
Battery Life: Approx. 10 hours
Weight: Approx 0.7lbs
Dimensions: Approx 4.9" x 1.1" x 3.7"