Technical information

COAL LAYOUT

Added Coals shown in white

for identification only.

Stage 1

Place the largest coal matrix firmly

against the back of the stove &

centrally about the mesh burner.

Stage 2

Position the second coal matrix on

top of the first coal matrix and

place firmly to the back of the

stove. Ensure that it is central and

that the largest flat area (marked

REAR) rests against the internal

rear plate.

Stage 3

Place the loose coals across the

centre of the fire, so that they

bridge the gap between the two

coal matrix pieces. These coals

should be rested gently in position.

Do not push them into the gap, as

this will prevent the flames from

burning evenly and effectively.

Ensure there are no loose coals on

top of the matrix that is positioned

over the pilot assembly.

IMPORTANT

Please follow these instructions carefully. Ceramics that are positioned

wrongly could seriously alter the performance of your appliance.

Added Coals shown in white for identification only.