AREA SOFT HARDWARE MANUAL BROTHER, BROTHER & SONS ApS
AREA48SOFT HARDWARE MANUAL INTRO Brother, Brother & Sons ApS The information in this manual is subject to change without notice. Go to www.brothers-sons.dk for the latest version. Brother, Brother & Sons ApS assumes no responsibility for any errors or inaccuracies that may appear in this manual. All information and graphics are the property of Brother, Brother & Sons ApS. Customer and Warranty service: Contact your regional dealer. Contact information for your area can be found at www.brotherssons.
AREA48SOFT HARDWARE MANUAL CONTENTS Intro.......................................................................................................................... Index.......................................................................................................................... Safety Information...................................................................................................... Maintenance......................................................................................
AREA48SOFT HARDWARE MANUAL SAFETY Safety Notice: It is important to read ALL safety information and instructions in this manual before installing and operating the product described. Safety symbol used in this manual: WARNING: Potential injury or damage to persons or product. The blue LEDs in this fixture is considered harmful to the eyesight. There is a phosphor media lock installed. Do not circumvent it, it is there for your safety.
AREA48SOFT HARDWARE MANUAL PRODUCT OVERVIEW PHOSPHOR MEDIA LOCK DMX OUT DMX IN AREA FOR BATTERY MOUNT OPTION. WWW.BROTHERS-SONS.
AREA48SOFT HARDWARE MANUAL PRODUCT OVERVIEW 29,75 mm 1,17” 326,5 mm 12,85” 225mm 8,86” 225mm 8,86” 225mm 8,86” 225mm 8,86” With barndoors: 360 mm/14,17” 222mm 8,74” 222mm 8,74” 155mm 6,1” With barndoors 291,5mm/11,47” 236,5mm 9,31” 118mm 4,65” 222mm 8,74” 102mm 4,02” With barndoors 125mm 4,93” WWW.BROTHERS-SONS.
AREA48SOFT HARDWARE MANUAL INSTALLATION Do not operate the product if the ambient temperature exceeds 40° C / 104°F This fixture must be connected to ground. This fixture is for indoor use only. Read the “Safety” and “Specifications” chapters first. Applying power: Never connect to dimmer power. Make sure the local power voltage is within the range specified. If so; connect a power cable and turn the power on.
AREA 48 SOFT HARDWARE MANUAL The blue LEDs in this fixture is considered harmful to the eyesight. There is a phosphor media lock installed. Do not circumvent it, it is there for your safety. The lock will force the fixture shut down when removed. REMOVING AND INSERTING PHOSPHOR MEDIA Pull the lock out and up, so that it rests on the top. This will push the media a little out. Grab the media at the top and pull it out.
AREA48SOFT HARDWARE MANUAL SPECIFICATIONS Physical: Depth: Width: Height: Weight: 102 mm / 4,53” 356 mm / 13,97” 275 mm / 10,82” 2,7kg / 5,92 lbs With barndoors 125mm / 4,93“ 360mm / 14,17“ 291,5mm / 11,47” 3,6 kg / 7,94 lbs Data: This product uses a 5-pin XLR for dmx input and output. Use shielded data cables. Do not overload the daisy chain. Up to a maximum of 32 devices can be used on a single dmx chain. Protocol: USITT DMX512-A For DMX channelsheet refer to the Software manual.