User's Manual

6
Turning on/off the printer
1 Press and hold the power
button for a short while, until
the green or blue status indi-
cator light illuminates.
→ When the power comes on, selecting
Bluetooth Switch ON, the status indicator
light will be blue. Selecting Bluetooth
Switch OFF, the status indicator light will
be green. (→ Refer to page 21.)
 In order to prevent this printer from accidentally being
turned on, it will not come on if the power button is
lightly pressed. Therefore, if the printer does not come
on, hold the power button pressed for a little while.
 In order to conserve the built-in lithium battery
during use, follow the operations below.
{ When the Bluetooth communication ON/OFF switch is
set to “ON”, the printer automatically enters the sleep
mode (
→ refer to page 21 ) if no operation is performed or
if no data is sent to the printer within a specified time.
(The length of time [auto sleep time] until the printer auto-
matically enters the sleep mode can be specified using
the Utility software. [
→ Refer to the Software Guide.])
{ When the Bluetooth communication ON/OFF switch
is set to OFF, the printer automatically powers off if
no operation is performed or if no data is sent to the
printer for five minutes. (The length of time [auto
power-off time] until the printer automatically pow-
ers off can be specified using the Utility software.
[
→ Refer to the Software Guide.])
MW-140BT_Hardware.book Page 6 Friday, June 13, 2003 10:43 AM