User's Manual

Getting Started
12
3 Insert the connector 1
of the battery 2 in the
direction shown right.
4 Fit the battery cord into
the groove as shown in
the illustration.
5 Install the battery cover
by sliding it onto the back
of the MW-145BT.
y Fully insert the connectors. However, do not
apply extreme force.
y Be sure to insert the connectors in the correct
orientation, otherwise they may be damaged.
• Be careful that you do not catch the battery con-
nector cord.
•
Be sure to dispose of the expired battery as directed by
local regulations for the disposal of lithium ion battery.
• When handling the rechargeable battery, refer to
and observe the precautions on pages v to ix.
Black
Red