User Manual
Table Of Contents
- Brother numbers
- Ordering accessories and supplies
- Compilation and Publication Notice
- Important Information
- General Information
- Telephone
- Menu and Features
- Troubleshooting and Routine Maintenance
- Specifications
General Information
3
1
b Place the battery in the correct position
as shown below.
c Slide the battery cover back on.
Note
• Be careful that you do not catch the
battery connector cord.
• After replacement, you should set the date
and time.
(See Date and Time on page 20.)
d Charge the battery for 12 hours. (See
Charging the battery on page 23)
Registering additional
cordless handsets 1
You can register 3 additional cordless
handsets for a total of 4 cordless handsets to
the machine (base unit). The cordless
handset that was included with your machine
is already registered with the machine (base
unit).
For non-Color LCD models
1
a Press Menu/OK on the cordless
handset.
Note
If you see Enter Register HS mode
on Base Unit on the LCD of the
cordless handset, go to step c.
b Press a or b to choose Register HS.
Press Menu/OK.
c Press Menu, 0, 6 on the control panel of
the machine (base unit).
d Press OK on the control panel of the
machine (base unit).
You will hear one long beep when the
cordless handset is registered correctly.
Note
• If you hear three short beeps, the cordless
handset did not register. Repeat steps b
and d.
• If you want to install another cordless
handset, repeat steps a through d.
e Press Stop/Exit on the control panel of
the machine (base unit).