User guide

4 Setting the Document

■

Documents must be between 14.8 and 21.6 cm wide, and 15 and 60 cm long. Your fax

machine can only scan an image 20.8 cm wide, regardless of how wide the paper is.

■

Make sure you insert documents face down, top edge first.

■

Adjust the paper guides to fit the width of your document.

■

The automatic document feeder (ADF) can hold up to 20 pages, feeding each one individually

through the fax machine. Use standard (64 g/m

~90 g/m

) paper when using the ADF; if you

are using heavier paper, feed each sheet individually to prevent paper jams.

■

Press

Resolution

(before you send the fax) to select the resolution for the document you are

sending. If you wish to send in STANDARD resolution, i.e. a general fax with no graphics,

then the default is STANDARD, and the resolution button need not be pressed. (See

Resolution

, page 21.)

• DO NOT use, curled, wrinkled paper, folded, ripped paper, or paper with

staples, paper clips, paste, or tape attached.

• DO NOT use, cardboard, newspaper, or fabric.

• DO NOT use paper on which correction fluid has been used.

• Make sure documents written with ink are completely dry.

5 Sending a fax automatically

Insert the document face down in the ADF.

Enter the fax number you want to call.

Press

Fax Start

IMPORTANT: Do not pick up the handset.

Paper Guides