Operation Manual

GETTING STARTED 2 - 6
Setting the Speaker Volume
You can adjust the speaker volume.
1
Press
Menu/Set
,
1
,
4
,
3
.
2
Press
▲
or
▼
to select
Low
,
Med
,
High
or
Off
.
Press
Menu/Set
.
3
Press
Stop/Exit
.
—OR—
Press
Hook
, and then adjust the speaker volume by pressing
or . The LCD shows the setting you are choosing. Each
key press changes the volume to the next setting. The new
setting will remain until you change it again.
FAX-1940CN only
When (
Fax
) is illuminated you can also change the speaker
volume in the following ways:
Press
Speaker Phone
, and then adjust the speaker volume by
pressing or . The LCD shows the setting you are
choosing. Each key press changes the volume to the next
setting. The new setting will remain until you change it again.
—OR—
You can adjust the speaker volume while you are listening to
your OGM (Outgoing Message) and ICMs (Incoming Messages)
by pressing or .
If you turn Incoming Recording Monitor to OFF (
Menu/Set
,
2
,
7
,
3
) the Speaker for screening calls will be disabled and you
won’t hear callers leaving messages. The volume for other
operations can still be controlled using or .
3.Speaker