Operation Manual
Table Of Contents
- USER'S GUIDE FAX-2440C/MFC-620CN
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial Setup
- General Setup
- Setting the Mode Timer (MFC-620CN only)
- Setting the Mode Timer (FAX-2440C only)
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Turning on Automatic Daylight Savings Time
- Setting the LCD Contrast
- 3 Setup Send
- 4 Setup Receive
- Basic receiving operations
- 5 Quick-Dial numbers and dialing options
- 6 Remote Fax Options (Not available for color faxes)
- 7 Message Center
- Message Center mode
- Setting up the Message Center
- Recording Message Center Outgoing Message
- Activating Message Center mode
- Message indicator
- Playing voice messages
- Printing a fax message
- Erasing incoming messages
- Setting Maximum Time for incoming messages
- Setting Toll Saver
- ICM Recording Monitor
- Recording a conversation
- Record Fax/Tel Outgoing Announcement (F/T OGM)
- Message Center mode
- 8 Printing reports
- 9 Making copies
- 10 Walk-Up PhotoCapture Center™ (MFC-620CN only)
- 11 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used in the United States only.
- Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- For your safety
- LAN connection (MFC-620CN only)
- International ENERGY STAR® Compliance Statement
- Important safety instructions
- Trademarks
- 12 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother USA/Canada
MAKING COPIES 9 - 14
Adjusting color saturation
1
Press
Menu/Set
,
3
,
4
.
2
Press
▲
or
▼
to select
Red
,
Green
or
Blue
.
Press
Menu/Set
.
3
Press
▲
to increase the color saturation.
—OR—
Press
▼
to decrease the color saturation.
Press
Menu/Set
.
4
Return to Step 2 to select the next color.
—OR—
Press
Stop/Exit
.
Out of Memory message
If the memory becomes full while you are making copies, the LCD
message will guide you through the next step.
If the
Out of Memory
message appears, press
Stop/Exit
to
cancel or
Black Start
or
Color Start
to copy the scanned pages.
You will need to clear some jobs from the memory before you can
continue.
When you get an
Out of Memory
message, you may be able
to make copies if you first print incoming faxes in the memory to
restore the memory to 100%.
To gain extra memory, you can turn off Fax Storage.
(See
Setting Fax Storage
on page 6-3.)
—OR—
Print the faxes that are in the memory.
(See
Printing a fax from the memory
on page 4-8.)
Copy
4.Color Adjust