Operation Manual
Table Of Contents
- USER'S GUIDE FAX-2440C/MFC-620CN
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial Setup
- General Setup
- Setting the Mode Timer (MFC-620CN only)
- Setting the Mode Timer (FAX-2440C only)
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Turning on Automatic Daylight Savings Time
- Setting the LCD Contrast
- 3 Setup Send
- 4 Setup Receive
- Basic receiving operations
- 5 Quick-Dial numbers and dialing options
- 6 Remote Fax Options (Not available for color faxes)
- 7 Message Center
- Message Center mode
- Setting up the Message Center
- Recording Message Center Outgoing Message
- Activating Message Center mode
- Message indicator
- Playing voice messages
- Printing a fax message
- Erasing incoming messages
- Setting Maximum Time for incoming messages
- Setting Toll Saver
- ICM Recording Monitor
- Recording a conversation
- Record Fax/Tel Outgoing Announcement (F/T OGM)
- Message Center mode
- 8 Printing reports
- 9 Making copies
- 10 Walk-Up PhotoCapture Center™ (MFC-620CN only)
- 11 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used in the United States only.
- Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- For your safety
- LAN connection (MFC-620CN only)
- International ENERGY STAR® Compliance Statement
- Important safety instructions
- Trademarks
- 12 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother USA/Canada
5 - 6 QUICK-DIAL NUMBERS AND DIALING OPTIONS
3
Use the dial pad to enter the Group
number (1 to 6).
Press
Menu/Set
.
(For example, press
1
for Group 1.)
4
To include Speed-Dial numbers in
the Group, press them as follows:
For example, for Speed-Dial
numbers 05 and 09. Press
Search/Speed Dial
,
05
,
Search/Speed Dial
,
09
. The LCD shows:
#05#09
.
5
Press
Menu/Set
to accept the Speed-Dial numbers for this
Group.
6
Use the dial pad and the chart on page B-12 to enter a name for
the Group.
Press
Menu/Set
.
(For example, type NEW CLIENTS).
7
Press
Stop/Exit
.
The Group number must be between 1 and 6.
You can print a list of all the Speed-Dial numbers. Group
numbers will be marked in the GROUP column.
(See
Printing reports
on page 8-3.)
Setup Groups
Setup Group:G01
Setup Groups
G01:#05#09